A new technical bulletin clarifies the definition of a window opening control device (WOCD) to promote greater understanding of the role of WOCDs and provide an understanding of a WOCD’s function.
\When properly designed, tested, specified, and installed, WOCDs can help prevent or reduce accidental falls from windows, while allowing the ability to open the window fully as may be needed to exit in the event of a home emergency, according to a news release from the Fenestration and Glazing Industry Alliance (FGIA) and the Window & Door Manufacturers Association (WDMA).
The document, AAMA/WDMA TB-24-01, “will help users understand the important role of WOCDs, and how to tell the difference between them and other window hardware types like vent limiters or night latches, designed for different purposes,” said Dan Raap (AmesburyTruth), co-chair of the FGIA Window Opening Control Device (WOCD) Update Task Group.
WOCDs were introduced as a new window fall prevention device starting with the 2008 version of the ASTM International (formerly known as American Society for Testing and Materials) (ASTM) F2090, Standard Specification for Window Fall Prevention Devices with Emergency Escape (Egress) Release Mechanisms. ASTM F2090 is a standard for window fall prevention devices that are releasable such that a window can be fully opened for emergency escape or rescue.
Related Stories
| Jun 14, 2012
Green standard set for single-ply roofing membrane
A sustainability standard has been established for single-ply roofing membranes used on commercial buildings.
| Jun 5, 2012
HP Labs aims for net-zero energy data centers
Building sustainable data centers is one of the goals of HP Labs, and it believes technology, combined with the right building techniques, could result in the construction of energy-efficient data centers.
| Jun 5, 2012
USGBC delays LEED 2012; renames it LEED v4
In response to concerns by LEED users, the U.S. Green Building Council (USGBC) announced that it will delay the ballot on LEED 2012 until June 1, 2013.
| Jun 1, 2012
New BD+C University Course on Insulated Metal Panels available
By completing this course, you earn 1.0 HSW/SD AIA Learning Units.
| May 31, 2012
Lawsuits push the legal boundaries of green building definition
This article explores some legal issues stemming from lawsuits in which plaintiffs have charged developers with not delivering on a promised level of sustainability.
| May 31, 2012
ANSI approves Green Building Initiative’s design standard
The Green Building Initiative (GBI), a Portland, Ore. nonprofit organization, has had its new consensus-based standard for the design, construction, and operations of environmentally friendly buildings approved by the American National Standards Institute (ANSI).
| May 31, 2012
USGBC testing Minnesota buildings to see if they are living up to LEED standards
The Minnesota chapter of the U.S. Green Building Council (USGBC) has teamed up with EnergyPrint, a St. Paul, Minn. energy consulting firm, to study the energy and water use of more than 150 buildings in the state that have LEED certification.
| May 29, 2012
Reconstruction Awards Entry Information
Download a PDF of the Entry Information at the bottom of this page.
| May 25, 2012
Major retail chains welcome LEED Volume option
Large national chains such as Starbucks, Marriott, Verizon, and Kohl’s are welcoming the LEED Volume Program that enables them to batch certify similar projects.
| May 24, 2012
2012 Reconstruction Awards Entry Form
Download a PDF of the Entry Form at the bottom of this page.