A new technical bulletin clarifies the definition of a window opening control device (WOCD) to promote greater understanding of the role of WOCDs and provide an understanding of a WOCD’s function.
\When properly designed, tested, specified, and installed, WOCDs can help prevent or reduce accidental falls from windows, while allowing the ability to open the window fully as may be needed to exit in the event of a home emergency, according to a news release from the Fenestration and Glazing Industry Alliance (FGIA) and the Window & Door Manufacturers Association (WDMA).
The document, AAMA/WDMA TB-24-01, “will help users understand the important role of WOCDs, and how to tell the difference between them and other window hardware types like vent limiters or night latches, designed for different purposes,” said Dan Raap (AmesburyTruth), co-chair of the FGIA Window Opening Control Device (WOCD) Update Task Group.
WOCDs were introduced as a new window fall prevention device starting with the 2008 version of the ASTM International (formerly known as American Society for Testing and Materials) (ASTM) F2090, Standard Specification for Window Fall Prevention Devices with Emergency Escape (Egress) Release Mechanisms. ASTM F2090 is a standard for window fall prevention devices that are releasable such that a window can be fully opened for emergency escape or rescue.
Related Stories
| Feb 12, 2013
Higher education institutions providing leadership on sustainability
More than 665 U.S. colleges and universities have publicly committed to pursue net-zero carbon emissions.
| Feb 12, 2013
ASHRAE publishes protocols for performance measurement
ASHRAE has published “Performance Measurement Procedures for Commercial Buildings: Best Practices Guide,” a how-to guide for continuously evaluating and improving the performance of commercial buildings throughout their service life.
| Feb 6, 2013
Lumber Standard Committee approves new Southern Pine design value changes
The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.
| Feb 6, 2013
CEIR seeks public input on draft of PV racking and attachment document
The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.
| Feb 6, 2013
Insurance Institute demonstration shows advantages of following wind resistance standards
A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.
| Feb 6, 2013
CSI: Revitalizing the brand to achieve the mission
CSI is revitalizing its brand as part of its continued pursuit of its mission: improving facility performance through better communication in the commercial-level construction industry.
| Jan 31, 2013
Proposed ASHRAE legionellosis prevention standard open for third public comment
Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.
| Jan 25, 2013
Energy modeling needed to overcome ‘plug load problem’ to meet high green standards
Plug loads illustrate how much end-users impact overall building energy use.
| Jan 25, 2013
ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2
A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.
| Jan 25, 2013
AISC 206-13 standard for structural steel erectors available for review
AISC 206-13, a quality management system standard for structural steel erectors, is now available for public review.
