A new technical bulletin clarifies the definition of a window opening control device (WOCD) to promote greater understanding of the role of WOCDs and provide an understanding of a WOCD’s function.
\When properly designed, tested, specified, and installed, WOCDs can help prevent or reduce accidental falls from windows, while allowing the ability to open the window fully as may be needed to exit in the event of a home emergency, according to a news release from the Fenestration and Glazing Industry Alliance (FGIA) and the Window & Door Manufacturers Association (WDMA).
The document, AAMA/WDMA TB-24-01, “will help users understand the important role of WOCDs, and how to tell the difference between them and other window hardware types like vent limiters or night latches, designed for different purposes,” said Dan Raap (AmesburyTruth), co-chair of the FGIA Window Opening Control Device (WOCD) Update Task Group.
WOCDs were introduced as a new window fall prevention device starting with the 2008 version of the ASTM International (formerly known as American Society for Testing and Materials) (ASTM) F2090, Standard Specification for Window Fall Prevention Devices with Emergency Escape (Egress) Release Mechanisms. ASTM F2090 is a standard for window fall prevention devices that are releasable such that a window can be fully opened for emergency escape or rescue.
Related Stories
Codes and Standards | Mar 5, 2015
Construction problems at prison spur support to quash non-traditional project delivery in Iowa
Iowa lawmakers are investigating construction problems at the Fort Madison prison project and are scrutinizing rules regarding project delivery on state projects.
Codes and Standards | Mar 5, 2015
AEC industry groups look to harmonize green building standards, codes
The USGBC, ASHRAE, ICC, IES, and AIA are collaborating on a single green code.
Codes and Standards | Mar 2, 2015
Nevada moves to suspend prevailing wage rules on school projects
The Nevada Senate approved a bill that would suspend prevailing wage rules on school projects.
Codes and Standards | Feb 22, 2015
Louisiana officials critical of stricter building standards in flood-prone areas
Buildings would have to be built either two or three feet above the base flood elevation for a 100-year flood or above the base elevation for a 500-year flood.
Codes and Standards | Feb 18, 2015
Buildings with rocking steel-braced frames are advantageous in earthquakes
Research at Case Western Reserve University has found that buildings that rock during an earthquake and return to plumb would withstand seismic shaking better than structural designs commonly used today in vulnerable zones of California and elsewhere.
Codes and Standards | Feb 18, 2015
USGBC concerned about developers using LEED registration in marketing
LEED administrators are concerned about a small group of developers or project owners who tout their projects as “LEED pre-certified” and then fail to follow through with certification.
Codes and Standards | Feb 12, 2015
ASHRAE, USGBC, IES consider biomass requirements in green building standard
The proposal would add biomass to approved renewables.
Codes and Standards | Feb 12, 2015
New Appraisal Institute form aids in analysis of green commercial building features
The Institute’s Commercial Green and Energy Efficient Addendum offers a communication tool that lenders can use as part of the scope of work.
Codes and Standards | Feb 8, 2015
ASHRAE, IAQA approve consolidation
Under the consolidation, IAQA will become a part of the ASHRAE organization while maintaining its own brand and Board of Directors.
Codes and Standards | Feb 6, 2015
Obama executive order requires federal construction projects to consider flood damage caused by climate change
To meet the new standard, builders must build two feet above the currently projected elevation for 100-year floods for most projects.