flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New standard test method for static loading and impact on exterior shading released

Codes and Standards

New standard test method for static loading and impact on exterior shading released

The method provides a standard lab procedure evaluation of ice and snow loads and impacts.


By Peter Fabris, Contributing Editor | April 3, 2017

Pixabay Public Domain

The American Architectural Manufacturers Association (AAMA) recently released a new document that provides a standard laboratory procedure for exterior shading devices and the project-specific evaluation of downward static ice and snow loads and impacts from falling ice or snow.

AAMA 514-16, the Standard Test Method of Static Loading and Impact on Exterior Shading Devices, uses sandbags to simulate downward loads from ice and snow to test shading devices.

“AAMA 514 was created to provide design professionals with a consistent, repeatable, test method to help in assessing the effects of snow build-up and ice impact on exterior shading devices,” said Greg McKenna, Co-Chair of the APG Shading Device Task Group. “Accretion and release of a certain amount of ice and snow should be considered inevitable in most U.S. climates.”

Following AAMA 514 will help to ensure that the specified sun shade product has been properly designed and tested to meet the anticipated loads during its service life, McKenna said.

Related Stories

Concrete | Aug 2, 2016

Concrete Association builds case against cross-laminated timber

The campaign asserts that not enough is known about CLT in construction

Seismic Design | Jul 28, 2016

Risk of man-made earthquakes now factor in seismic hazard analysis

Significant risk increases seen in some areas of the U.S.  

Resiliency | Jul 27, 2016

New York’s resilience plans not taking long-term view, critics charge

Continued waterfront development may be regretted later this century.  

Green Specifications | Jul 26, 2016

New Miami Beach law requires LEED certification on projects larger than 7,000 sf

LEED Silver the prescribed standard on buildings larger than 50,000 sf.

Energy | Jul 25, 2016

Michigan law provides local governments with flexible energy conservation financing

Allows cities to fund projects without adding debt.  

Contractors | Jul 15, 2016

Trade unions, contractors call for maximum penalty in construction worker death case

‘Sick and tired’ of lawbreaking contractors defining public perception.  

Multifamily Housing | Jul 14, 2016

Portland, Ore., City Council approves construction excise tax for affordable housing

Expected to raise $8 million annually on commercial and residential projects.  

Drones | Jul 13, 2016

FAA issues final rule on commercial use of drones

The rule covers commercial uses for drones that weigh less than 55 pounds, and it takes effect Aug. 29.  

Codes and Standards | Jul 12, 2016

OSHA raises maximum civil penalties by 78%

Applies to infractions that occurred after Nov. 2, 2015.  

School Construction | Jul 11, 2016

Fight over school funding in Arizona headed to court

Legislature accused of ignoring 1994 ruling ordering state to pick up some of the costs.  

boombox1
boombox2
native1

More In Category

Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021