flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New RELi standard addresses disaster resilience

Codes and Standards

New RELi standard addresses disaster resilience

Based on LEED model, may help lower insurance rates


By Peter Fabris, Contributing Editor | September 18, 2015

The RELi standard helps planners design buildings that can better withstand shocks such as droughts. Photo: CSIRO/Wikimedia Commons

Design firm Perkins+Will has unveiled the RELi standard that uses a points system similar to the LEED model to guide design for disaster resilience. The goal is to encourage city planners, project developers, and businesses to build and operate facilities that can better withstand shocks such as super storms, sea-level rise, drought, heat waves or social unrest.

With 194 requisites and credits, the resilience standard likely will operate on a 1,000-point scale and offer three or four levels of certification. The standard fills a void for insurance underwriters who currently lack a protocol to value the green and resilient attributes of a project, according to Perkins+Will executives.

Those who develop properties according to this standard could be rewarded with lower insurance rates. RELi can also be applied to public sector projects including infrastructure. Perkins+Will is launching several pilots to evaluate the new standard.

The new standard will be discussed at the VERGE City Summit 2015, on Oct. 26 in San Jose, Calif.

Related Stories

| Mar 15, 2012

ANSI approves new fall protection standards

The American National Standards Institute (ANSI) has approved two American Society of Safety Engineers' (ASSE) standards addressing fall protection.

| Mar 8, 2012

Engineering innovation provides new option for meeting seismic codes in skyscrapers

Two University of Toronto engineers have developed “viscoelastic-energy-dissipating dampers” to replace many of the heavy concrete beams used in tall structures.

| Mar 8, 2012

CSI webinar on building code compliance March 22

A March 22 webinar will provide an overview of a 28-step process during the design of a building to ensure compliance with building codes.

| Mar 8, 2012

Federal silica dust rule caught in bureaucratic limbo

A federal rule meant to protect the lungs of workers has been caught in bureaucratic purgatory for more than a year.

| Mar 8, 2012

New LEED-EBOM rating has requirements for specific project types

Several key changes are proposed for the LEED-EBOM Rating System in 2012.

| Mar 8, 2012

Green buildings more resilient than conventionally built structures

A new study by the U.S. Green Building Council (USGBC) and the University of Michigan’s Taubman College of Architecture and Urban Planning suggests that structures built to green standards can advance building resiliency.

| Mar 1, 2012

LEED Platinum standard likely to mean net-zero energy by 2018

As LEED standards continue to rise, the top level, LEED Platinum, will likely mean net-zero energy construction by 2018.

| Mar 1, 2012

EPA beefs up stormwater discharge rule from construction projects

The U.S. Environmental Protection Agency (EPA) has now finalized its 2012 construction general permit (CGP) that authorizes stormwater discharges from construction projects that disturb one or more acres of land in the areas where EPA is the permitting authority.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021