Lighting and LED driver manufacturers, Internet of Things (IoT) technology companies, and industry groups have established the IoT-Ready Alliance.
The organization is dedicated to making installation of IoT technology in luminaires easier. The aim is to facilitate “quick and easy installation of advanced IoT sensors” to be as simple as changing a light bulb.
“This will also enable building operators to easily upgrade the sensors, ultimately future-proofing their buildings as IoT technology continues to advance at a much more rapid pace than that of LED fixtures,” according to an alliance news release. The lifecycle of such fixtures can be 15 years, so if they are not updated owners would likely wait until they are replaced before upgrading to IoT technology.
“IoT-based lighting systems have tremendous potential to optimize energy efficiency and bring new kinds of value to the lighting and building industries and beyond,” said Gabe Arnold, technical director, DesignLights Consortium.
Related Stories
| Nov 26, 2012
How to boost resilient systems that are sustainable
Cities of the future can be both more resilient and more sustainable by promoting strategies that include solar power and green roofs, programs that minimize demand for energy, rain gardens, and permeable pavement.
| Nov 26, 2012
Developer of nation’s first LEED platinum skyscraper focuses on carbon reduction
The Durst Organization, the developer of the first LEED platinum certified skyscraper in the country, says it will not seek LEED certification for its residential pyramid planned for New York’s West 57th Street.
| Nov 26, 2012
Questions linger over ability of Miami's newer high-rises to withstand hurricanes
Some towers in Miami, rebuilt after a hurricane in 2005, were allowed to be constructed under older building codes instead of newer ones created after Hurricane Wilma.
| Nov 26, 2012
Changes in development and building standards needed for health of Potomac River
The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.