flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New International Building Code allows weather-resistive barriers above 40 feet

Codes and Standards

New International Building Code allows weather-resistive barriers above 40 feet

Danger of propagating flames now deemed negligible.


By Peter Fabris, Contributing Editor | July 12, 2017

Rehman Abubakr, Wikimedia Commons

The new International Building Code now allows for the use of weather-resistive barriers above 40 feet high.

Code restrictions had been designed to limit the use of combustible materials that might propagate flames. In the 2015 update, however, exceptions are allowed that recognize that in certain circumstances a weather-resistive barrier by itself would be a negligible contributor to the spread of flames.

This change should result in an energy efficiency boost in cases where builders have had to transition to less efficient methods of weather sealing above 40 feet. Weather-resistive barriers are now allowed in walls in which the water-resistive barrier is the only combustible component and the exterior wall has a fire-resistant wall covering of brick, concrete, stone, terracotta, stucco, or steel.

The material can also be used in walls in which the water-resistive barrier is the only combustible component and the water-resistive barrier has certain heat, flame spread, and smoke properties in accordance with ASTM E 1354 and ASTM E84 or UL723.

Related Stories

Codes and Standards | Feb 24, 2022

Most owners adapting digital workflows on projects

Owners are more deeply engaged with digital workflows than other project team members, according to a new report released by Trimble and Dodge Data & Analytics.

Codes and Standards | Feb 21, 2022

More bad news on sea level rise for U.S. coastal areas

A new government report predicts sea levels in the U.S. of 10 to 12 inches higher by 2050, with some major cities on the East and Gulf coasts experiencing damaging floods even on sunny days.

Codes and Standards | Feb 21, 2022

New standard for ultraviolet germicidal irradiation

The Illuminating Engineering Society (IES) recently introduced the standard, ANSI/IES RP-44-21 Recommended Practice: Ultraviolet Germicidal Irradiation.

Wood | Feb 18, 2022

$2 million mass timber design competition: Building to Net-Zero Carbon (entries due March 30!)

To promote construction of tall mass timber buildings in the U.S., the Softwood Lumber Board (SLB) and USDA Forest Service (USDA) have joined forces on a competition to showcase mass timber’s application, commercial viability, and role as a natural climate solution.  

Codes and Standards | Feb 18, 2022

Proposal would make all new buildings in Los Angeles carbon-neutral

Los Angeles may become the next large city to ban fossil fuels from new construction if legislation recently introduced in the city council becomes law.

Codes and Standards | Feb 18, 2022

U.S. Army outlines ambitious renewable energy and decarbonization goals

Net-zero emissions in all procurements and a microgrid at every base among aims.

Codes and Standards | Feb 17, 2022

Pandemic won’t alter urban planning

City planners focused on returning to ‘old normal’.

Codes and Standards | Feb 16, 2022

California court rules affordable housing developers exempt from local zoning

Case could set precedent on state law that overrides local rules.

Codes and Standards | Feb 15, 2022

FORTIFIED resiliency standard expanded to include multifamily sector

Voluntary, beyond-code program aims to protect buildings from severe weather.

Codes and Standards | Feb 10, 2022

Number of Americans at risk of flooding to double in 30 years

Most new risk from new development, not climate change.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021