The Brick Industry Association (BIA) has launched a new industrywide clay brick Environmental Product Declaration.
The EPD contributes toward LEED v.4.0 and v.4.1 materials and resources requirements. The EPD has been third-party certified and published, reflecting data associated with the manufacture of units that comply with nearly every currently active ASTM clay brick specification, according to a news release from BIA.
“The Brick Industrywide EPD represents the average environmental impact of clay brick production in the U.S. and Canada,” the release says. “The data for the EPD captures 32% of 2018 brick production submitted by 13 different manufacturers from plants in 14 states and provinces in the U.S. and Canada. The range of data includes brick formed by the stiff-mud and soft-mud processes and includes brick made in tunnel and periodic kilns.”
Products from an industrywide EPD are valued by LEED v4.1 as one whole product for the purposes of the credit achievement calculation. LEED v4.0 awards a value of one-half for these products. A total of 20 products are required on a project to receive this credit.
Related Stories
| May 17, 2012
New standard for Structural Insulated Panels under development
ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.
| May 17, 2012
Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’
A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.
| May 17, 2012
California Governor orders new green standards on state buildings
California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.
| May 17, 2012
New Zealand stadium roof collapse blamed on snow, construction defects
Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.
| May 17, 2012
OSHA launches fall prevention campaign
The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.
| May 15, 2012
Suffolk selected for Rosenwald Elementary modernization project
The 314-student station elementary school will undergo extensive modernization.
| May 10, 2012
Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond
Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.
| May 10, 2012
Resilience should be considered a sustainability factor
Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.
