The Brick Industry Association (BIA) has launched a new industrywide clay brick Environmental Product Declaration.
The EPD contributes toward LEED v.4.0 and v.4.1 materials and resources requirements. The EPD has been third-party certified and published, reflecting data associated with the manufacture of units that comply with nearly every currently active ASTM clay brick specification, according to a news release from BIA.
“The Brick Industrywide EPD represents the average environmental impact of clay brick production in the U.S. and Canada,” the release says. “The data for the EPD captures 32% of 2018 brick production submitted by 13 different manufacturers from plants in 14 states and provinces in the U.S. and Canada. The range of data includes brick formed by the stiff-mud and soft-mud processes and includes brick made in tunnel and periodic kilns.”
Products from an industrywide EPD are valued by LEED v4.1 as one whole product for the purposes of the credit achievement calculation. LEED v4.0 awards a value of one-half for these products. A total of 20 products are required on a project to receive this credit.
Related Stories
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
Codes and Standards | Feb 17, 2017
New energy design guide for metal building systems now available
The second edition incorporates more recent IECC and ASHRAE standards.
