The Fenestration and Glazing Industry Alliance (FGIA) has released a new document for guidance in selecting skylights and on designing daylighting features.
AAMA SKY-3-20, Skylight Selection and Daylighting Design Guide including Unit Skylights, Tubular Daylight Devices (TDD) and Sloped Glazing, was developed in 2020. The 51-page document is now available as a complimentary download.
“This document is intended to assist the user in understanding the nature of fenestration products and systems which provide features and performance characteristics necessary for effective use on sloped or horizontal building envelope surfaces,” said John Westerfield (CrystaLite), chair of the FGIA Skylight Sloped Glazing Marketing Committee, in a news release.
The new guide is part of a suite of documents to assist with the proper design, selection, specification, and use of skylights. Other skylight documents from FGIA include:
• AAMA PSSG, Selection and Application Guide for Plastic Glazed Skylights and Sloped Glazing
• AAMA 1607, Voluntary Installation Guidelines for Unit Skylights
• TIR-A7, Sloped Glazing Guidelines
• AAMA SSGPG-1, Structural Silicone Glazing (SSG) Design Guidelines
• AAMA GDSG-1, Glass Design for Sloped Glazing and Skylights
Related Stories
| Nov 26, 2012
How to boost resilient systems that are sustainable
Cities of the future can be both more resilient and more sustainable by promoting strategies that include solar power and green roofs, programs that minimize demand for energy, rain gardens, and permeable pavement.
| Nov 26, 2012
Developer of nation’s first LEED platinum skyscraper focuses on carbon reduction
The Durst Organization, the developer of the first LEED platinum certified skyscraper in the country, says it will not seek LEED certification for its residential pyramid planned for New York’s West 57th Street.
| Nov 26, 2012
Questions linger over ability of Miami's newer high-rises to withstand hurricanes
Some towers in Miami, rebuilt after a hurricane in 2005, were allowed to be constructed under older building codes instead of newer ones created after Hurricane Wilma.
| Nov 26, 2012
Changes in development and building standards needed for health of Potomac River
The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.