The Fenestration and Glazing Industry Alliance (FGIA) has released a new document for guidance in selecting skylights and on designing daylighting features.
AAMA SKY-3-20, Skylight Selection and Daylighting Design Guide including Unit Skylights, Tubular Daylight Devices (TDD) and Sloped Glazing, was developed in 2020. The 51-page document is now available as a complimentary download.
“This document is intended to assist the user in understanding the nature of fenestration products and systems which provide features and performance characteristics necessary for effective use on sloped or horizontal building envelope surfaces,” said John Westerfield (CrystaLite), chair of the FGIA Skylight Sloped Glazing Marketing Committee, in a news release.
The new guide is part of a suite of documents to assist with the proper design, selection, specification, and use of skylights. Other skylight documents from FGIA include:
• AAMA PSSG, Selection and Application Guide for Plastic Glazed Skylights and Sloped Glazing
• AAMA 1607, Voluntary Installation Guidelines for Unit Skylights
• TIR-A7, Sloped Glazing Guidelines
• AAMA SSGPG-1, Structural Silicone Glazing (SSG) Design Guidelines
• AAMA GDSG-1, Glass Design for Sloped Glazing and Skylights
Related Stories
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
Codes and Standards | Feb 17, 2017
New energy design guide for metal building systems now available
The second edition incorporates more recent IECC and ASHRAE standards.