flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New guide examines multifamily high-performance ventilation

Codes and Standards

New guide examines multifamily high-performance ventilation

The focus is on cost and performance of various systems.


By Peter Fabris, Contributing Editor | March 8, 2017

Pixabay Public Domain

A new guide published by the U.S. Department of Energy focuses on high-performance ventilation on new multifamily construction.

“Measure Guideline: Ventilation Guidance for Residential High-Performance New Construction – Multifamily,” contains decision criteria for weighing cost and performance of various ventilation systems. It includes design and installation instructions for the most cost-effective and performance-effective solutions for multifamily unit ventilation that satisfy the requirements of ASHRAE 62.2-2016.

Dwelling unit ventilation approaches that are compliant with ASHRAE Standard 62.2-2016 within enclosures constructed in accordance with the ICC 2015 International Residential Code (IRC) currently are not typical, the guide says. Exhaust-only and supply-only ventilation strategies can both be problematic in multifamily dwelling units that are constructed to meet the 2015 IRC or ASHRAE Standard 62.2-2016 air tightness requirements. 

Balanced ventilation strategies are strongly recommended for multifamily construction and have been shown to be effective. This document provides guidance on balanced ventilation strategies and on several other issues including kitchen exhaust and supplemental dehumidification.

Related Stories

Codes and Standards | Feb 17, 2022

Pandemic won’t alter urban planning

City planners focused on returning to ‘old normal’.

Codes and Standards | Feb 16, 2022

California court rules affordable housing developers exempt from local zoning

Case could set precedent on state law that overrides local rules.

Codes and Standards | Feb 15, 2022

FORTIFIED resiliency standard expanded to include multifamily sector

Voluntary, beyond-code program aims to protect buildings from severe weather.

Codes and Standards | Feb 10, 2022

Number of Americans at risk of flooding to double in 30 years

Most new risk from new development, not climate change.

Codes and Standards | Feb 10, 2022

Intl. Code Council committee on diversity seeks applicants

New board aims to increase diversity in the membership association.

Codes and Standards | Feb 9, 2022

Climate impact of gas stoves in U.S. equal to half a million cars

New study could increase momentum to ban fossil fuels in new buildings.

Codes and Standards | Feb 7, 2022

Energy efficiency ratings not reflecting true energy use

Highest rated U.K. buildings are less efficient than lower rated ones.

Codes and Standards | Feb 3, 2022

Illinois tops USGBC list of states with the most LEED certified projects in 2021

Top 10 states plus D.C. certified more than 247 million gross square feet.

Codes and Standards | Feb 2, 2022

Public works contracting reform advances in New York State

Governor signs bill to form advisory council that will propose policy changes.

Codes and Standards | Feb 2, 2022

Commercial and multifamily construction starts rebounded in 2021

Following COVID uncertainty in 2020, the industry recovered, but still lags 2019 levels.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021