A new guide published by the U.S. Department of Energy focuses on high-performance ventilation on new multifamily construction.
“Measure Guideline: Ventilation Guidance for Residential High-Performance New Construction – Multifamily,” contains decision criteria for weighing cost and performance of various ventilation systems. It includes design and installation instructions for the most cost-effective and performance-effective solutions for multifamily unit ventilation that satisfy the requirements of ASHRAE 62.2-2016.
Dwelling unit ventilation approaches that are compliant with ASHRAE Standard 62.2-2016 within enclosures constructed in accordance with the ICC 2015 International Residential Code (IRC) currently are not typical, the guide says. Exhaust-only and supply-only ventilation strategies can both be problematic in multifamily dwelling units that are constructed to meet the 2015 IRC or ASHRAE Standard 62.2-2016 air tightness requirements.
Balanced ventilation strategies are strongly recommended for multifamily construction and have been shown to be effective. This document provides guidance on balanced ventilation strategies and on several other issues including kitchen exhaust and supplemental dehumidification.
Related Stories
| Jan 16, 2013
New standard for geothermal heat pump systems piping to be included in 2015 International Mechanical Code
NSF International, an independent global organization that writes standards, and tests and certifies products, has published the first in a series of American National Standards for Ground-Source Geothermal Piping Systems – NSF/ANSI 358-1.
| Jan 16, 2013
ANSI passes new safety standards for reinforcing steel and post-tensioning
The ANSI A10 Accredited Standards Committee for Construction and Demolition Operations recently approved amendments to the ANSI A10.9 Concrete and Masonry Standard.
| Jan 8, 2013
Congress passes Drywall Safety Act
Congress recently passed the Drywall Safety Act; President Barack Obama is expected to sign it soon.
| Jan 8, 2013
Building-integrated PVs could help boost green standards over the next few years
A developing technology could begin to have an impact on sustainable standards over the next few years.
| Jan 8, 2013
Revamp of codes among nine low tech steps to raise community resiliency
Updating of local zoning and building codes is one of nine low-tech steps that can boost sustainability and storm resiliency, according to this article.
| Jan 8, 2013
Group releases safety and building codes from 24 countries
Public.Resource.Org released 10,062 public safety documents including building codes covering 24 countries and 6 regions.
| Jan 8, 2013
Montana developing high-performance building standards for state projects
The Montana Department of Administration is developing a single building standard for all state facilities, and hopes to have a plan in place this spring.
| Jan 4, 2013
AGC economist says "fiscal cliff" deal will give construction a boost
The deal in Congress to avoid going over the so-called fiscal cliff "should encourage many businesses to go ahead with projects they have held in reserve," said Ken Simonson, chief economist of the Associated General Contractors of America.
| Jan 4, 2013
California standards on furnishings, insulation to be revised
California is revising the state’s standards on interior furniture and insulation to maintain or improve fire safety while reducing or eliminating the use of toxic chemicals.
| Jan 4, 2013
Tilt-Up Concrete Association releases new temporary wind bracing guidelines
The Tilt-Up Concrete Association has released revised guidelines on Temporary Wind Bracing of Tilt-Up Concrete Panels During Construction.