A special focus Green Matters Conference, held Feb. 23-24, 2012 in San Antonio, Texas brings together leading industry experts to share up-to-date information on sustainable concrete technologies and trends in green building. High-interest topics will be covered in technical seminars, including infrared reflective coatings for heat island mitigation, innovative uses of concrete to provide cooling and stormwater management, environmental benefits of polished concrete, and advancements in functional resilience of architectural concrete.
“When innovative products and new methods come to market, it is a challenge to evaluate when, where and how to use them,” says conference director Sherry Boyd. “It’s a huge advantage that the Green Matters Conference is held side by side with the Concrete Decor Show so that attendees are able to see them in use and talk with technical experts during demonstrations and competitions.”
Registration for the Green Matters Conference includes admission to the exhibit hall floor Feb. 22-24 and to live demonstrations of the latest product and equipment developments scheduled at the Henry B. Gonzalez Convention Center. During three action-packed days, the demonstration pavilion showcases competitions in arenas dedicated to polished concrete, concrete coatings, and precast fabrication. On Wednesday, Feb. 22 and Thursday, Feb. 23 a lunch, included free with event registration, is served in the exhibit hall to allow attendees uninterrupted time to see the action and talk with industry leaders.
The panel discussions and technical seminars at the Green Matters Conference go beyond reviewing the criteria for green building certification to look more closely at innovative materials and methods. The courses offer AIA-CES Credits. TimGregorski, Senior Editor for Building Design+Construction leads a panel discussion on “Sustainable Design Using Architectural and Decorative Concrete”.
An opening address by David D. Shepherd, AIA, LEED AP, Director of Sustainable Development for the Portland Cement Association, presents an industry outlook for 2012 and beyond, including an update on new research at MIT being sponsored by the Concrete Joint Sustainability Initiative. He will translate their academic findings for the benefit of nonscientists.
The Green Matters Conference is targeted to the whole building team, including public and private project owners and managers, architects, landscape architects, interior designers, builders, general contractors, specialty subcontractors, facility managers, municipal authorities and related consultants. The event will raise awareness and understanding of the new directions in sustainable design and green building that are made possible with architectural and decorative concrete. The Green Matters Conference and the Concrete Decor Show, take place at the Henry B. Gonzalez Convention Center in February 2012. The new event is owned and operated by Professional Trade Publications, Inc. For more information, visit www.greenconcretematters.com. BD+C
Related Stories
Building Team | Jun 22, 2018
What owners should know before choosing the design-build project delivery method
Outside of drawing up a well-written contract, owners often overlook a key attribute that can significantly impact the success of a design-build project, writes Skanska’s Julie Hyson.
Architects | Jun 14, 2018
Chicago Architecture Center sets Aug. 31 as opening date
The Center is located at 111 E. Wacker Drive.
Multifamily Housing | Jun 13, 2018
Multifamily visionaries: KTGY’s extraordinary expectations
KTGY Architecture + Planning keeps pushing the boundaries of multifamily housing design in the U.S., Asia, and the Middle East.
| Jun 11, 2018
Accelerate Live! talk: Regenerative design — When sustainability is not enough
In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), HMC’s Eric Carbonnier poses the question: What if buildings could actually rejuvenate ecosystems?
| Jun 11, 2018
Accelerate Live! talk: The smart jobsite — Predictive visual data analytics for proactive project controls
In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), a trio of experts in predictive visual data analytics presents how design-build giant Clayco has leveraged this technology to achieve production efficiency on several construction sites.
| Jun 11, 2018
Accelerate Live! talk: Design innovation at Adrian Smith + Gordon Gill Architecture
In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), AS+GG’s Anthony Viola takes us behind the magic curtain to illuminate the firm’s methods for nurturing design innovation.
| Jun 11, 2018
Accelerate Live! talk: ‘AEC can has Blockchains?’
In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), HOK’s Greg Schleusner explores how the AEC industry could adapt the best ideas from other industries (banking, manufacturing, tech) to modernize inefficient design and construction processes.
| Jun 11, 2018
Accelerate Live! talk: How advanced digital fabrication techniques are driving design innovation
In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), SOM’s Lucas Tryggestad and Kyle Vansice present the firm’s 3D-printed building project and explore how digital fabrication is pushing design innovation.
| Jun 11, 2018
Accelerate Live! talk: AEC + Data + AI — Poison for some, elixir for others
In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), predictive analytics expert David Morgareidge offers steps that AE firms can take today if they want to survive AECO digital transformation.
Education Facilities | Jun 8, 2018
Data is driving design for education
In gathering this constant flow of data and recognizing the shifting trends, how can educational institutions make informed choices and smart design decisions that lead to higher efficiency and improved control over capital budgets?