The second edition of the Metal Building Manufacturers Association's (MBMA) Energy Design Guide for Metal Building Systems, Second Edition, is now available.
This publication provides a detailed overview of the International Energy Conservation Code (IECC) and ASHRAE Standard 90.1 provisions as they apply to metal building systems. The updated version incorporates 2012 and 2015 International Energy Conservation Codes and the 2010 and 2013 editions of ASHRAE Standard 90.1.
Additional information is included on the latest editions of green building codes, standards, and rating systems. The second edition synthesizes information on how to design, construct, and maintain metal buildings to be in compliance with these codes.
The newly released manual is available at www.techstreet.com/MBMA.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.