The American Institute of Steel Construction’s (AISC) 15th Edition Steel Construction Manual is now available.
The new edition includes the 2016 Specification for Structural Steel Buildings, with improvements and revisions in the provisions for slender-element compression members, shear strength and double angle and WT flexural strength. It also includes the 2016 Code of Standard Practice, which clarifies the use of models, and new and enhanced Architecturally Exposed Structural Steel (AESS) standards.
This is the 15th major update of the Manual, which was first published in 1927. The 14th edition was released in 2011. Major updates in the new edition include:
- New heavier W-shape sizes and larger HSS, pipe and angle sizes.
- A new, all-in-one, “super table” that gives the available compressive, flexural, shear and tension strengths for W-shapes.
- W-shape column tables for 65- and 70-ksi steel.
- HSS design tables updated to higher strength ASTM A500 Grade C steel.
- Updated coped beam strength design procedure
“AISC is aware of the difficulty experienced by the structural engineering profession when dealing with the frequent changes in building codes and material standards,” said Larry Kruth, PE, AISC’s vice president of engineering and research. “The enhancements in the 15th Edition Manual should be a great aid in helping structural engineers in adapting to these changes when designing with steel.”
Related Stories
| Sep 11, 2013
White paper examines Joint Commission requirements for NFPA codes in healthcare
The healthcare industry has experienced great attention from The Joint Commission concerning fire and life safety issues.
| Sep 11, 2013
San Francisco expected to drop firefighter air tank refilling station rule for skyscrapers
San Francisco is poised to drop a requirement that skyscrapers have refill stations so firefighters can recharge their air tanks during a blaze. The city has required that new high-rises have the air refill systems for about ten years.
| Sep 5, 2013
State legislatures continue to raise the bar on green school construction
Since the beginning of 2013, the USGBC has followed more than 125 bills across 34 states that seek to advance healthy, high-performing schools.
| Sep 5, 2013
Construction industry groups create coalition to respond to new OSHA silica rule
A group of 11 construction trade associations has created the Construction Industry Safety Coalition in response to the Occupational Safety and Health Administration’s (OSHA) proposed rule on silica for the construction industry.
| Sep 5, 2013
Red tape delays California county jail construction projects
California authorized $1.2 billion for jail construction in 2007, but not a single county in the state has completed a jail project since then.
| Sep 5, 2013
New CM-at-risk and design-build options create controversy in Ohio
Some contractors say Ohio's new system puts small and midsize construction companies at a disadvantage.
| Sep 5, 2013
Outdated codes slowed disaster recovery in Tuscaloosa, Ala.
Outdated building codes and lack of a master plan slowed the initial rebuilding stage after a devastating tornado leveled parts of Tuscaloosa, Ala. in 2011, according to the city’s mayor.
| Aug 28, 2013
Building collapse prompts legislation to beef up demolition regulations in Philadelphia
Philadelphia City Council will introduce legislation next month to strengthen the regulation of building demolition practices.
| Aug 28, 2013
Rules requiring contractors to boost hiring of veterans criticized
Some businesses are pushing back against proposed rules requiring federal contractors to step up their hiring of returning military service personnel.
| Aug 28, 2013
OSHA moves to reduced exposure to crystalline silica
Under a proposal from the Occupational Safety and Health Administration, the new permissible exposure limit to crystalline silica per cubic meter of air could be changed from 250 micrograms to 50 micrograms.
