The American Institute of Steel Construction’s (AISC) 15th Edition Steel Construction Manual is now available.
The new edition includes the 2016 Specification for Structural Steel Buildings, with improvements and revisions in the provisions for slender-element compression members, shear strength and double angle and WT flexural strength. It also includes the 2016 Code of Standard Practice, which clarifies the use of models, and new and enhanced Architecturally Exposed Structural Steel (AESS) standards.
This is the 15th major update of the Manual, which was first published in 1927. The 14th edition was released in 2011. Major updates in the new edition include:
- New heavier W-shape sizes and larger HSS, pipe and angle sizes.
- A new, all-in-one, “super table” that gives the available compressive, flexural, shear and tension strengths for W-shapes.
- W-shape column tables for 65- and 70-ksi steel.
- HSS design tables updated to higher strength ASTM A500 Grade C steel.
- Updated coped beam strength design procedure
“AISC is aware of the difficulty experienced by the structural engineering profession when dealing with the frequent changes in building codes and material standards,” said Larry Kruth, PE, AISC’s vice president of engineering and research. “The enhancements in the 15th Edition Manual should be a great aid in helping structural engineers in adapting to these changes when designing with steel.”
Related Stories
| Mar 30, 2014
Solar panels on Big Ben intended to spur U.K.’s sustainability targets
Solar panels may soon be installed on the face of Big Ben in London as part of the U.K.'s initiatives to reach its greenhouse gas emissions objectives under the Climate Change Act of 2008.
| Mar 26, 2014
EPA clarifies Clean Water Act in revision that was opposed by developers
The Environmental Protection Agency recently unveiled a rule designed to define more clearly which waterways are covered by the Clean Water Act and therefore require U.S. permits for certain activities.
| Mar 26, 2014
Better Buildings Initiative leading to tens of millions of dollars in savings annually, says DOE
Facilities across the nation have been able to shave on average about 2.5% of their annual utility costs through efficiency initiatives spurred by the federal Better Buildings Initiative, according to the Department of Energy’s Maria Vargas.
| Mar 26, 2014
Univ. of Nebraska-Omaha fire could prompt building code changes
A dormitory fire at the University of Nebraska at Omaha that displaced with 42 students (but caused no injuries) could trigger local building code changes.
| Mar 26, 2014
Associated Builders and Contractors wary of federal overtime rules changes
Associated Builders and Contractors (ABC) cautioned that President Obama’s directive to the U.S. Department of Labor to change federal overtime rules could harm its members.
| Mar 19, 2014
Oklahoma City mandates safe rooms in new schools
The move will affect 24 districts that have schools inside Oklahoma City limits.
| Mar 19, 2014
Green building standards can help building become more storm-resistant
Structures built to green standards have added resilience to destructive storms because green buildings are often constructed with stronger, more sustainable materials than traditional buildings.
| Mar 19, 2014
Ohio Senate passes rule to require state agencies use ANSI standards rather than LEED
The resolution specifically mentions LEED v4, and calls for the U.S. Green Building Council to conform to ANSI.
| Mar 19, 2014
Tucson ignores ADA, building code on city-owned property
The city has been operating a downtown dirt parking lot in violation of its own code and the federal law for years.
| Mar 19, 2014
Santa Monica, Calif., may offer LEED alternatives to help promote green construction
With developers in Santa Monica, Calif., looking for ways to build green more inexpensively, the city may consider alternatives to LEED such as Green Globes.