flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New drinking water standard criteria further restricts lead leaching in plumbing products

Codes and Standards

New drinking water standard criteria further restricts lead leaching in plumbing products

Tightened standard applies to endpoint devices that dispense drinking water, and other plumbing components


By Peter Frabis, Contributing Editor | September 29, 2020

Courtesy Pixabay

Newly published changes to NSF/ANSI/CAN 61, the drinking water product standard used in the U.S. and Canada, reduce the amount of lead that can leach from plumbing products.

The “significantly more rigorous requirements” were approved after years of exploring various testing methods to reduce lead leaching from endpoint devices that dispense drinking water, as well as from other plumbing components, according to a NSF International news release.

More stringent pass/fail criteria for standard certification will require the maximum amount of lead leaching to be reduced from 5 micrograms (µg) to 1 µg for devices that dispense drinking water such as faucets, and from 3 µg to 0.5 µg for other plumbing components such as connector hoses and small shut-off valves. In-line mechanical devices and other product categories under NSF/ANSI/CAN 61 are not subject to the new requirements.

Revisions to the standard were approved by the Council of Public Health Consultants and ratified by the American National Standards Institute (ANSI) and the Standards Council of Canada (SCC). Certification of applicable products to the more stringent lead leaching criteria is optional for the next three years to allow manufacturers time to comply. On Jan. 1, 2024, all products will be required to meet the stricter requirements.

Related Stories

| Oct 9, 2014

California authorizes increased use of design-build on state projects

Under the updated law, the Department of General Services and the Department of Corrections and Rehabilitation may use design-build on projects in excess of $1 million. 

| Oct 9, 2014

New York City releases guide for retrofitting buildings against floods

Part of the city’s response to widespread flooding as a result of Hurricane Sandy, the manual offers retrofitting strategies that will enable property owners to reduce the risk of damage and disruption from coastal flooding.

| Oct 9, 2014

Seattle puts restrictions on micro apartments

The Seattle City Council passed new rules that new studio apartments in the city must measure at least 220 sf and contain at least two sinks.

| Oct 9, 2014

Cities get creative with stormwater management

Cities around the world are crafting stormwater management policies that include natural and manmade methods to store and absorb runoff to reduce flooding.

| Oct 2, 2014

Fannie Mae study says affordable rental units more energy efficient than market-rate units

Fannie Mae’s new report on energy usage in the multifamily sector found that affordable properties use 28% less energy per unit and are 29% smaller than market-rate properties.

| Oct 2, 2014

California Energy Commission launches code upgrade process

The California Energy Commission launched the upgrade process to Title 24, the state energy code, last month.

| Oct 2, 2014

Canals to mitigate flooding could be in Boston’s future

The Urban Land Institute held brainstorming sessions over the last several months involving more than 70 engineers, architects, and development and insurance specialists to examine how rising sea levels would affect four representative areas in and around Boston.

| Oct 2, 2014

Los Angeles reverses ban on high-rise slanted roofs and spires

Los Angeles reversed course last month on a regulation that had barred skyscrapers from having slanted roofs or spires.

| Sep 29, 2014

10 common deficiencies in aging healthcare facilities

VOA's Douglas King pinpoints the top issues that arise during healthcare facilities assessments, including missing fire/smoke dampers, out-of-place fire alarms, and poorly constructed doorways. 

| Sep 29, 2014

Report finds links between office design, health and productivity

A new report from the World Green Building Council finds “overwhelming evidence” to support office design as a significant influencer of the health, wellbeing and productivity of staff.

boombox1
boombox2
native1

More In Category




Government Buildings

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021