flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New drinking water standard criteria further restricts lead leaching in plumbing products

Codes and Standards

New drinking water standard criteria further restricts lead leaching in plumbing products

Tightened standard applies to endpoint devices that dispense drinking water, and other plumbing components


By Peter Frabis, Contributing Editor | September 29, 2020

Courtesy Pixabay

Newly published changes to NSF/ANSI/CAN 61, the drinking water product standard used in the U.S. and Canada, reduce the amount of lead that can leach from plumbing products.

The “significantly more rigorous requirements” were approved after years of exploring various testing methods to reduce lead leaching from endpoint devices that dispense drinking water, as well as from other plumbing components, according to a NSF International news release.

More stringent pass/fail criteria for standard certification will require the maximum amount of lead leaching to be reduced from 5 micrograms (µg) to 1 µg for devices that dispense drinking water such as faucets, and from 3 µg to 0.5 µg for other plumbing components such as connector hoses and small shut-off valves. In-line mechanical devices and other product categories under NSF/ANSI/CAN 61 are not subject to the new requirements.

Revisions to the standard were approved by the Council of Public Health Consultants and ratified by the American National Standards Institute (ANSI) and the Standards Council of Canada (SCC). Certification of applicable products to the more stringent lead leaching criteria is optional for the next three years to allow manufacturers time to comply. On Jan. 1, 2024, all products will be required to meet the stricter requirements.

Related Stories

Codes and Standards | Dec 1, 2015

More than 50 design, construction, and real estate firms urge action on climate change

Call for policymakers to move on one of the ‘greatest economic opportunities of the 21st Century’

Codes and Standards | Oct 26, 2015

Chicago suburb considers bird collision deterrent requirement on all new buildings

The rule would mandate that new commercial, multifamily structures comply with LEED pilot program.

Codes and Standards | Oct 16, 2015

Anchorage may raise building height restrictions that would block precious winter sunlight

Controversial measure is part of plan to spur development.

Codes and Standards | Oct 9, 2015

New California law means commercial building benchmarking program will be implemented

Multifamily housing to be included, a first for a U.S. state.

Codes and Standards | Oct 2, 2015

New ASHRAE guideline for commissioning existing systems and assemblies

Focuses on optimum facility and system operation.

Codes and Standards | Sep 18, 2015

New RELi standard addresses disaster resilience

Based on LEED model, may help lower insurance rates  

Building Materials | Aug 28, 2015

Structural steel buildings specification available for second public review

Next year's specification open for comments until Sept. 21

Energy Efficiency | Aug 28, 2015

North American Passive House Network e-book explains Passivhaus, net-zero techniques

Free guide includes spotlight on individual projects

boombox1
boombox2
native1

More In Category

Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021