flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New design guide for hybrid steel-mass timber frames released

Codes and Standards

New design guide for hybrid steel-mass timber frames released

Arup-authored document encourages the use of mass timber floor systems.


By Peter Fabris, Contributing Editor | June 2, 2022
Steel Construction
Courtesy Pixabay.

The American Institute of Steel Construction (AISC) has released the first-ever set of U.S. recommendations for hybrid steel frames with mass timber floors, according to a news release.

Design Guide 37: Hybrid Steel Frames with Wood Floors, written by Arup, encourages the use of mass timber floor systems in construction, “an underused yet important material to reduce the amount of carbon-intensive concrete in a structure,” the release says. The guide provides a comprehensive context for this new building typology, detailing strategies from the perspective of multiple disciplines.

By facilitating this new generation of sustainable buildings, the guide will help accelerate the use of hybrid timber and steel in multistory residential and commercial construction. Mass timber is lightweight, and steel provides strength to structures and may better meet buildings’ vibration and span requirements.

Hybrid steel-frame buildings with mass timber floor panels allow for longer beam spans and reduced column size than comparable mass-timber post and beam construction, making it an attractive option for market-driven spaces such as office buildings. Cross-laminated timber (CLT) flooring can take the place of carbon-intensive concrete slabs and may be left exposed in places, such as at soffits, eliminating the need for additional architectural finishes and allowing for the showcasing of the structural aesthetics of both steel and mass timber.

“Mass timber and steel hybrid systems have tremendous potential to advance the building industry’s sustainability goals and reduce global emissions,” said Michelle Roelofs, associate principal at Arup. “Illuminating pathways for this hybrid topology will help accelerate the use of timber in place of more carbon-intensive materials.”
 

Related Stories

| Nov 14, 2013

ISO, FLASH team up to promote stronger building codes

ISO has joined the national nonprofit Federal Alliance for Safe Homes (FLASH) to encourage communities to build disaster-resistant buildings that can withstand hurricanes, tornadoes, earthquakes, and other catastrophic events.

| Nov 6, 2013

Cost to small businesses from silica rule is raised by progressive group

The silica-dust rule from the Occupational Safety and Health Administration could put small businesses at a disadvantage on the cost of complying with the mandate, according to the Center for Progressive Reform.

| Nov 6, 2013

Uneven snow load concern prompts structural study of Minnesota college auditorium roof

The roof of the Memorial Auditorium of Concordia College in Minnesota will undergo a complete structural analysis because it was built to 1946 codes and may not be able to accommodate uneven snow loads.

| Nov 6, 2013

Dallas’s goal of carbon neutrality by 2030 advances with second phase of green codes

Dallas stands out as one of the few large cities that is enforcing a green building code, with the city aiming to be carbon neutral by 2030.

| Nov 6, 2013

Task force to examine resiliency in the face of climate change

President Barack Obama recently signed an executive order related to climate change and disaster-management efforts during severe weather events and other disasters.

| Nov 6, 2013

USGBC Northern California chapter focuses on improving indoor environments in green buildings

The Northern California branch of the U.S. Green Building Council is leading the “Building Health Initiative” that seeks to improve the indoor environment of green buildings.

| Oct 31, 2013

OSHA enacts 47-day extension for comment period on silica-exposure rule

The Occupational Safety and Health Administration has extended the public comment period on its silica-dust exposure rule by 47 days.

| Oct 31, 2013

Updates to California’s building codes take effect Jan. 1

Green-building and accessibility are the major themes of the 2013 updates to California’s construction codes that are set to take effect Jan. 1.

| Oct 31, 2013

IECC code updates include better lighting controls and new HVAC technology

The proposed new code will increase the mandatory installation of occupancy sensors and daylighting controls to many new types of spaces.

| Oct 31, 2013

Effects of green, white roofs to be compared at Walmart in Oregon

Portland State University will construct a 40,000 sf green roof research site on the top of a new Walmart store in North Portland, Ore., and compare it to a 52,000 sf section of roof with a white membrane.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021

Â