flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New cross-laminated timber fire tests back proponents of high-rise wood structures

Codes and Standards

New cross-laminated timber fire tests back proponents of high-rise wood structures

'Demonstrating for the first time the feasibility of tall mass timber buildings in the U.S.’


By Peter Fabris, Contributing Editor | October 20, 2016

Photo: Oregon State University, flickr Creative Commons.

The Framework Project, LLC announced that the company has successfully completed two significant fire tests on Cross-laminated Timber as a building material, “demonstrating for the first time the feasibility of tall mass timber buildings in the U.S.”

The two tests provide proof that a mass timber assembly using Cross-laminated Timber (CLT) and Glue-laminated timber (glulam) can be used safely while meeting stringent fire code requirements. Tall wood buildings using CLT and glulam have already been permitted in Europe, Australia, and Canada.

The tests also achieved breakthrough results, Framework Project says. A two-hour fire rating for the glulam beam to glulam column connection is a “fundamental breakthrough in mass timber construction, exceeding results conducted anywhere in the world.” This construction system allows mass timber to be used for high-rise construction, with some of the timber exposed. In previous CLT fire tests, the structural frame of timber has been concealed under layers of gypsum board.

Tests were conducted by Southwest Research Institute (SwRi), an independent, nonprofit, applied research and development organization.

Related Stories

Codes and Standards | Jan 10, 2022

New ratings services focus on climate risk for homeowners

Efficacy of models used in risk assessment varies.

Codes and Standards | Jan 6, 2022

Virginia contractors having a tough time finding diverse subs to meet state goals

Survey of primes may indicate similar issues at federal level.

Codes and Standards | Jan 5, 2022

Boston drops parking requirements for affordable housing

Measure expected to spur new projects.

Codes and Standards | Jan 4, 2022

Dept. of Energy Better Climate Challenge aims for 50% GHG emission reduction by 2030

Program offers technical assistance and peer-to-peer knowledge sharing.

Codes and Standards | Jan 4, 2022

Architects at New York firm take steps to unionize

Support for unionization reported at two other New York firms.

Codes and Standards | Jan 3, 2022

Biden’s executive order for a carbon-neutral government includes green materials mandate

As a driver of demand, federal procurement impact could ripple through the economy.

Codes and Standards | Jan 3, 2022

Controversial California solar power incentive proposal would reduce subsidies

Plan intended to encourage customers to install power storage systems.

Codes and Standards | Jan 3, 2022

New York City bans new gas hookups

Applies to gas stoves, boilers, and heaters in new buildings and buildings that undergo gut renovations.

Codes and Standards | Jan 3, 2022

New engineering guide on fire safety for very tall buildings released

Topics include emergency egress, fire resistance, building envelope, suppression, detection, alarms, and smoke control.

Codes and Standards | Dec 22, 2021

Updated ASCE 7-22 standard includes first-ever criteria for tornado-resistant design

New document provides up-to-date, coordinated loading provisions for general structural design.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021