flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New cross-laminated timber fire tests back proponents of high-rise wood structures

Codes and Standards

New cross-laminated timber fire tests back proponents of high-rise wood structures

'Demonstrating for the first time the feasibility of tall mass timber buildings in the U.S.’


By Peter Fabris, Contributing Editor | October 20, 2016

Photo: Oregon State University, flickr Creative Commons.

The Framework Project, LLC announced that the company has successfully completed two significant fire tests on Cross-laminated Timber as a building material, “demonstrating for the first time the feasibility of tall mass timber buildings in the U.S.”

The two tests provide proof that a mass timber assembly using Cross-laminated Timber (CLT) and Glue-laminated timber (glulam) can be used safely while meeting stringent fire code requirements. Tall wood buildings using CLT and glulam have already been permitted in Europe, Australia, and Canada.

The tests also achieved breakthrough results, Framework Project says. A two-hour fire rating for the glulam beam to glulam column connection is a “fundamental breakthrough in mass timber construction, exceeding results conducted anywhere in the world.” This construction system allows mass timber to be used for high-rise construction, with some of the timber exposed. In previous CLT fire tests, the structural frame of timber has been concealed under layers of gypsum board.

Tests were conducted by Southwest Research Institute (SwRi), an independent, nonprofit, applied research and development organization.

Related Stories

| Apr 26, 2012

Lack of bolts on steel support caused collapse at Cincinnati casino

Too few bolts connecting horizontal steel support beams with vertical steel columns was the cause of January’s construction accident at Horseshoe Casino Cincinnati, according to the report of the Occupational Safety and Health Administration.

| Apr 26, 2012

OSHA criticized for taking too long to roll out safety rules

The Occupational Safety and Health Administration takes far too long to adopt new safety regulations compared to other agencies’ development of rules, safety experts said during a Senate hearing.

| Apr 26, 2012

Contractors fear that GSA scandal will lead to fewer federal construction contracts

In the wake of the recent scandal at the General Services Administration in which workers spent lavishly at a Las Vegas conference, a spokesman for Associated General Contractors of America said contractors are worried the scandal will result in cuts to GSA's construction and renovation budgets.

| Apr 26, 2012

Developers can use LEED wastewater credits to help gain approvals in environmentally sensitive locales

Those wanting to pursue development in heavily regulated and environmentally sensitive areas are benefiting by designing projects that qualify for LEED points, even if the project as a whole does not achieve certification.

| Apr 26, 2012

New York City Council moves to license elevator mechanics

New York’s City Council introduced a measure last week that would require the city’s 7,000 elevator mechanics to meet national standards and be licensed by the city.

| Apr 23, 2012

AAMA releases updated specification for anodized aluminum

AAMA 611-12 describes test procedures and requirements for high performance (Class I) and commercial (Class II) architectural quality aluminum oxide coatings applied to aluminum extrusions and panels for architectural products.

| Apr 19, 2012

Michigan legislature tackling controversial rules on electricians

A fight is brewing in the Michigan legislature over how many fully qualified electricians must be present during electrical work when apprentices also are on hand.

| Apr 19, 2012

Washington city may base building code on rising sea level due to global warming

Aberdeen may become the first city in Washington to base a building code on rising oceans and global warming.

| Apr 19, 2012

CSI webinar on energy codes and building envelopes

This seminar will review recent changes in energy codes, examples of building enclosure wall assemblies for code compliance, potential moisture management and durability challenges, and design tools to assess and minimize potential problems.

boombox1
boombox2
native1

More In Category


Reconstruction & Renovation

Movement to protect historic buildings raises sharp criticism

While the movement to preserve historic buildings has widespread support, it also has some sharp critics with well-funded opposition groups springing up in recent years. Some opponents are linked to the Stand Together Foundation, founded and bankrolled by the Koch family’s conservative philanthropic organization, according to a column in Governing magazine.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021