The Framework Project, LLC announced that the company has successfully completed two significant fire tests on Cross-laminated Timber as a building material, “demonstrating for the first time the feasibility of tall mass timber buildings in the U.S.”
The two tests provide proof that a mass timber assembly using Cross-laminated Timber (CLT) and Glue-laminated timber (glulam) can be used safely while meeting stringent fire code requirements. Tall wood buildings using CLT and glulam have already been permitted in Europe, Australia, and Canada.
The tests also achieved breakthrough results, Framework Project says. A two-hour fire rating for the glulam beam to glulam column connection is a “fundamental breakthrough in mass timber construction, exceeding results conducted anywhere in the world.” This construction system allows mass timber to be used for high-rise construction, with some of the timber exposed. In previous CLT fire tests, the structural frame of timber has been concealed under layers of gypsum board.
Tests were conducted by Southwest Research Institute (SwRi), an independent, nonprofit, applied research and development organization.
Related Stories
| Oct 8, 2013
Government shutdown closes E-Verify, could hamper construction hiring
E-Verify, the online federal program used to check the immigration status of prospective hires, has been closed due to the federal government shutdown.
| Oct 3, 2013
Florida contractors worry that regulations will hamper their ability to hire
Regulations such as the E-Verify rule and the Affordable Care Act could hinder contractors from hiring additional workers, according to some Florida contractors.
| Oct 3, 2013
Fall protection violations top OSHA citations list
Violations of fall-protection standards in fiscal 2013 are again the most frequent source of citations from the Occupational Safety and Health Administration, according to its top 10 list.
| Oct 3, 2013
Arizona utility pushes for change in building codes to boost efficiency on all commercial projects
Many large construction projects in Arizona are going green by paying attention to energy efficiency, but smaller buildings that are often rented out haven't yet jumped on the bandwagon.
| Oct 3, 2013
Bipartisan energy efficiency bill stalled; may not be revived this year
The Senate spent the first two weeks of September trying to pass bipartisan energy efficiency legislation, commonly known as Shaheen-Portman (S. 1392) that would have impacted building codes.
| Oct 3, 2013
LEED credential exams will feature LEED v4 material beginning next spring
The LEED Professional Credential exams for the LEED Green Associate and LEED AP with specialty designations will feature LEED v4 material beginning in late spring 2014.
| Sep 26, 2013
Ballot period on National CAD Standards open until Oct. 13
The Ballot Comment Period to update the nation’s leading computer-aided design (CAD) standard is now open.
| Sep 26, 2013
OSHA encourages comments on respirable crystalline silica rules
The Occupational Safety and Health Administration’s proposed rulemaking for respirable crystalline silica has been published in the Federal Register.
| Sep 26, 2013
EPA’s final rule on updated ASTM standard likely to be withdrawn
The Environmental Protection Agency is expected to withdraw a direct final ruleissued in Augustregarding an ASTM standard for Phase I Environmental Site.
| Sep 26, 2013
A primer on RoofPoint green-rating system for commercial roofs
The RoofPoint green-rating system can be used to construct more energy-efficient and sustainable commercial roofs.