flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New California law means commercial building benchmarking program will be implemented

Codes and Standards

New California law means commercial building benchmarking program will be implemented

Multifamily housing to be included, a first for a U.S. state.


By Peter Fabris, Contributing Editor | October 9, 2015
New California law means commercial building benchmarking program will be implemented

Pioneer Building Loft Apartments in San Diego. The state's benchmarking program will be expanded to cover large multifamily housing. Photo: Joe Wolf/Creative Commons

California Gov. Jerry Brown recently signed AB 802 into law, which means the state’s building benchmarking program will be implemented.

Under this law, the benchmarking program will be expanded to cover large multifamily housing, making California the first state in the country with a benchmarking program spanning both building sectors. It will also give owners of residential and commercial buildings their total energy usage information.

This data will make it easier for owners to make decisions about energy efficiency and renewable investments to improve building performance. The bill also directs state agencies to double their efforts to improve the energy efficiency of buildings and businesses throughout the state.

That requirement, along with another that directs all electricity providers in the state to get at least 50% of their supply of electricity from renewable resources like wind and solar by no later than 2030, is predicted to cut carbon pollution in the power sector close to 40% below 2020 forecast levels.

Related Stories

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

| May 10, 2012

Resilience should be considered a sustainability factor

Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021