flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New ASHRAE standard defines ‘zero energy’ and ‘zero carbon’ buildings

Codes and Standards

New ASHRAE standard defines ‘zero energy’ and ‘zero carbon’ buildings

The standard draws from other ASHRAE standards to address energy and carbon flows across a site boundary, their measurement, and their balance.


By Peter Fabris, Contributing Editor | May 8, 2023
Photo by Dids via Pexels

Photo by Dids via Pexels

ASHRAE has released a new standard that defines the terms "zero Energy" and "zero carbon" to describe buildings.

ANSI/ASHRAE Standard 228-2023, Standard Method of Evaluating Zero Net Energy and Zero Net Carbon Building Performance, sets requirements for evaluating whether a building or group of buildings meets a definition of “zero net energy” or a definition of “zero net carbon” during operation. The standard draws from other ASHRAE standards to address energy and carbon flows across a site boundary, their measurement, and their balance.

“Achieving a zero energy building has been viewed by many as a difficult goal to meet, with unforeseeable roadblocks and differing guidance,” said Keith Emerson, P.E., Life Member ASHRAE, chair of the Standards Project Committee 228. Standard 228 provides a consistent method for determining whether new and existing sites have reached zero energy. We hope this standard will become a helpful resource for building professionals in strategic decarbonization planning.”

Features of Standard 228 include:

  • Allowances for sites that lack the means to produce adequate renewable energy, while placing additional requirements on the use of external carbon and renewable energy in the calculation.
  • Defined calculation of energy in terms of source—a multiplier on the energy crossing the site boundary including energy used or lost in extraction, generation, and transit to the site.
  • The main energy calculation made in terms of annual average factors. Allowance is made for the calculation of individual hours where data is available.

Related Stories

| May 28, 2014

Commercial building measurement standard could meet resistance from owners

For some building owners, a new measurement standard could mean that their building would shrink in size and lose value.

| May 28, 2014

Resiliency measures for hurricanes can help with tornadoes

Architect Butch Grimes, who examined the wreckage after a half-mile tornado struck Tuscaloosa, Ala., believes toughening building codes can reduce damage from twisters.

| May 28, 2014

Rooftop wind turbines becoming green status symbol in New York City

New York City developers are using rooftop wind turbines in an effort to attract buyers by highlighting a building’s green credentials.

| May 28, 2014

Peer review process under way for the WELL Building Standard

The standard is the first protocol of its kind that focuses on improving human wellness within the built environment by identifying specific conditions that, when holistically integrated into building interiors, enhance the health and wellbeing of the occupants.

| May 22, 2014

ASHRAE releases best practice guide for liquid cooling systems in data centers

The publication provides guidelines on interface requirements between chilled-water systems and technology cooling systems and on the requirements of liquid-cooled systems that attach to a datacom electronics rack.

| May 22, 2014

Colorado approves $4.2B data center said to be invulnerable to power outages

The Niobrara Data Center Energy Park project in Colorado will be the first data center to be fully self-contained with its own self-generated energy production facility.

| May 22, 2014

Energy Department analysis shows efficiency gains from ASHRAE 2013 energy standard

Preliminary DOE analysis shows that the ASHRAE/IES’s 2013 energy efficiency standard contains energy savings over the 2010 standard of 8.5% source energy and 7.6% site energy.

| May 22, 2014

Federal disaster policy should focus on mitigation, insurance group says

Federal disaster policy should shift its focus toward mitigation in order to reduce future disaster costs, the National Association of Mutual Insurance Companies says.

| May 22, 2014

Study quantifies cost premiums for net zero buildings

The 73-page report breaks down the incremental cost premiums for transforming three LEED Platinum-designed buildings into net-zero energy, net-zero water, and living Buildings. 

| May 22, 2014

Senate kills bipartisan energy efficiency bill over Keystone pipeline amendment

The legislation focused on energy efficiency standards such as water heaters with smart meters and cheaper heating and cooling systems for office buildings.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021