American Institute of Architects’ 2017 updates of contract documents provide detailed guidelines on how to devise and assign responsibility for sustainable elements of a construction project.
Key points of Document E204–2017 include:
- A requirement for the architect and owner to hold a sustainable design feature workshop
- Delineation of testing and implementation strategies to achieve sustainability goals
- Allocation of responsibility for sustainable measures
Other provisions address specific sustainable issues such as materials substitutions, construction waste management, registration with certifying authority, and achieving a sustainable objective at substantial and final completion. The overall sustainability plan is defined as a contract document.
Owners, architects, and contractors are expected to understand the sustainability plan and their responsibilities in performing measures that are assigned to them. The document states that the contractor does not guarantee achievement of the sustainable objective (such as LEED certification) but is responsible if the company fails to live up to its duties to perform sustainable measures assigned to it.
E204 is meant as an attachment to the owner-architect agreement, the owner-contractor agreement, and other project-related agreements as appropriate. This document replaces earlier documents D503–2011 and A141–2014 Exhibit C. The latter was meant specifically for design/build contracts. The new document addresses sustainability for projects of all types of delivery methods.
For more information, visit: www.aiacontracts.org.
Related Stories
| Oct 3, 2013
Florida contractors worry that regulations will hamper their ability to hire
Regulations such as the E-Verify rule and the Affordable Care Act could hinder contractors from hiring additional workers, according to some Florida contractors.
| Oct 3, 2013
Fall protection violations top OSHA citations list
Violations of fall-protection standards in fiscal 2013 are again the most frequent source of citations from the Occupational Safety and Health Administration, according to its top 10 list.
| Oct 3, 2013
Arizona utility pushes for change in building codes to boost efficiency on all commercial projects
Many large construction projects in Arizona are going green by paying attention to energy efficiency, but smaller buildings that are often rented out haven't yet jumped on the bandwagon.
| Oct 3, 2013
Bipartisan energy efficiency bill stalled; may not be revived this year
The Senate spent the first two weeks of September trying to pass bipartisan energy efficiency legislation, commonly known as Shaheen-Portman (S. 1392) that would have impacted building codes.
| Oct 3, 2013
LEED credential exams will feature LEED v4 material beginning next spring
The LEED Professional Credential exams for the LEED Green Associate and LEED AP with specialty designations will feature LEED v4 material beginning in late spring 2014.
| Sep 26, 2013
Ballot period on National CAD Standards open until Oct. 13
The Ballot Comment Period to update the nation’s leading computer-aided design (CAD) standard is now open.
| Sep 26, 2013
OSHA encourages comments on respirable crystalline silica rules
The Occupational Safety and Health Administration’s proposed rulemaking for respirable crystalline silica has been published in the Federal Register.
| Sep 26, 2013
EPA’s final rule on updated ASTM standard likely to be withdrawn
The Environmental Protection Agency is expected to withdraw a direct final ruleissued in Augustregarding an ASTM standard for Phase I Environmental Site.
| Sep 26, 2013
A primer on RoofPoint green-rating system for commercial roofs
The RoofPoint green-rating system can be used to construct more energy-efficient and sustainable commercial roofs.
| Sep 26, 2013
ConsensusDocs releases updated federal subcontract to help construction firms perform federal work
The newly revised ConsensusDocs standard subcontract (ConsensusDocs 752 for federal work) will make it easier for general contractors and subcontractors to perform federal work.