American Institute of Architects’ 2017 updates of contract documents provide detailed guidelines on how to devise and assign responsibility for sustainable elements of a construction project.
Key points of Document E204–2017 include:
- A requirement for the architect and owner to hold a sustainable design feature workshop
- Delineation of testing and implementation strategies to achieve sustainability goals
- Allocation of responsibility for sustainable measures
Other provisions address specific sustainable issues such as materials substitutions, construction waste management, registration with certifying authority, and achieving a sustainable objective at substantial and final completion. The overall sustainability plan is defined as a contract document.
Owners, architects, and contractors are expected to understand the sustainability plan and their responsibilities in performing measures that are assigned to them. The document states that the contractor does not guarantee achievement of the sustainable objective (such as LEED certification) but is responsible if the company fails to live up to its duties to perform sustainable measures assigned to it.
E204 is meant as an attachment to the owner-architect agreement, the owner-contractor agreement, and other project-related agreements as appropriate. This document replaces earlier documents D503–2011 and A141–2014 Exhibit C. The latter was meant specifically for design/build contracts. The new document addresses sustainability for projects of all types of delivery methods.
For more information, visit: www.aiacontracts.org.
Related Stories
Codes and Standards | Mar 7, 2017
Canada’s national building codes will encompass effects of climate change
Forecasted data, not historical data, will be used as the basis for the codes.
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
