The U.S. Naval Facilities Engineering Command (NAVFAC) will begin its Building Information Management and Modeling (BIM) Phased Implementation Plan in October.
As a result, design and construction companies interested in working for this federal owner must have a firm grasp of BIM technologies and the forthcoming NAVFAC BIM requirements.
The agency intends to use BIM as a life cycle tool where the models are maintained and updated during the life of the building. However, examples of true life-cycle BIM do not exist to date whereby 3D parametric models are maintained and updated for life-cycle management, NAVFAC says.
The new requirements apply to all projects (Design Build (DB) & A/E Design Bid Build (DBB)) of new construction greater than or equal to $750,000 and major renovations greater than or equal to 50% of the Plant Replacement Value and greater than or equal to $2.5 million.
Related Stories
Codes and Standards | May 16, 2018
New resources offer tips on off-site construction
NIBS documents address using pre-cast concrete, and commercial and legal considerations of modular construction.
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
