The National Roofing Contractors Association recently made significant updates to its Roof Wind Designer.
The online wind-load calculator is intended to offer roofing professionals an easy way to determine roof systems' design wind loads for many common building types that are subject to code compliance. The free web-based application has been updated to include changes made to ASCE 7, “Minimum Design Loads and Associated Criteria for Buildings and Other Structures.”
There were changes to basic wind maps, new roof zone layouts, and to pressure coefficients. Roof Wind Designer also added the ability to perform wind-load calculations for the 2016 version of ASCE 7, and enables users to choose between three versions of the standard: ASCE 7-05, ASCE 7-10, and ASCE 7-16.
The 2016 version of the application also can be used on flat buildings up to 160 feet tall using the standard's Chapter 30, Part 4: Buildings with 60ft < h ≤ 160ft (Simplified). For more information, visit www.roofwinddesigner.com.
Related Stories
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
| Nov 16, 2012
Green building councils in 62 countries expect 60% of their work to be green by 2015
More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.
| Nov 16, 2012
Voters approve fewer construction ballot measures in 2012 than in 2008
Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.
| Nov 9, 2012
New ANSI/BIFMA standard adds point for lower formaldehyde emissions
The ANSI/BIFMA e3-2012 Furniture Sustainability Standard now includes an additional point for furniture products that meet a new, lower formaldehyde emissions limit.
| Nov 9, 2012
Higher bar on LEED may not be harder to reach
The U.S. Green Building Council expects to substantially revise LEED next year, requiring builders beginning in 2015 to take new and more-detailed steps to get buildings certified.
| Nov 9, 2012
CSI’s sustainability practice group offers webinar on EPA's WaterSense Program
The Construction Specification Institute’s sustainability practice group is offering a webinar Nov. 20 on EPA’s WaterSense Program, featuring Lynn Gilleland, drinking water specialist with EPA’s New England office.
