The National Roofing Contractors Association recently made significant updates to its Roof Wind Designer.
The online wind-load calculator is intended to offer roofing professionals an easy way to determine roof systems' design wind loads for many common building types that are subject to code compliance. The free web-based application has been updated to include changes made to ASCE 7, “Minimum Design Loads and Associated Criteria for Buildings and Other Structures.”
There were changes to basic wind maps, new roof zone layouts, and to pressure coefficients. Roof Wind Designer also added the ability to perform wind-load calculations for the 2016 version of ASCE 7, and enables users to choose between three versions of the standard: ASCE 7-05, ASCE 7-10, and ASCE 7-16.
The 2016 version of the application also can be used on flat buildings up to 160 feet tall using the standard's Chapter 30, Part 4: Buildings with 60ft < h ≤ 160ft (Simplified). For more information, visit www.roofwinddesigner.com.
Related Stories
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
Codes and Standards | Feb 17, 2017
New energy design guide for metal building systems now available
The second edition incorporates more recent IECC and ASHRAE standards.