The National Roofing Contractors Association recently made significant updates to its Roof Wind Designer.
The online wind-load calculator is intended to offer roofing professionals an easy way to determine roof systems' design wind loads for many common building types that are subject to code compliance. The free web-based application has been updated to include changes made to ASCE 7, “Minimum Design Loads and Associated Criteria for Buildings and Other Structures.”
There were changes to basic wind maps, new roof zone layouts, and to pressure coefficients. Roof Wind Designer also added the ability to perform wind-load calculations for the 2016 version of ASCE 7, and enables users to choose between three versions of the standard: ASCE 7-05, ASCE 7-10, and ASCE 7-16.
The 2016 version of the application also can be used on flat buildings up to 160 feet tall using the standard's Chapter 30, Part 4: Buildings with 60ft < h ≤ 160ft (Simplified). For more information, visit www.roofwinddesigner.com.
Related Stories
Codes and Standards | Sep 21, 2017
After construction crane collapses during Irma, regulations questioned
Cranes rated for 140 mph winds didn’t hold up to 100 mph gusts.
Codes and Standards | Sep 20, 2017
Energy efficiency measures pay off in some not-so-obvious ways
Access to better financing, tax incentives, rent premiums, among the benefits to greener buildings.
Codes and Standards | Sep 19, 2017
Benchmarking regulations prompt jump in green certified properties
2016 saw a slight rise in total certified U.S. green office space.
Codes and Standards | Sep 18, 2017
Changes likely to come to federal wetlands regulations
However, states may step up regulations as feds relax them.
Codes and Standards | Sep 14, 2017
Gentrification means a new mindset for city planners
Rising rents elicit reexamination of zoning principles.
Codes and Standards | Sep 13, 2017
OSHA issues extension for compliance with crane operator certification requirements
Comments on proposed rule sought through Sept. 29.
Codes and Standards | Sep 12, 2017
Washington, D.C. is first LEED Platinum city in the world
All city government buildings are powered by renewables.
Codes and Standards | Sep 11, 2017
Natural solutions would be most effective flood resilience policies for Houston
New green infrastructure should be part of rebuild.
Codes and Standards | Sep 8, 2017
Los Angeles luxury high-rise is first U.S. apartment building to achieve WELL Multifamily certification
Hollywood Proper Residences have verified indoor air and water quality features.
Codes and Standards | Sep 7, 2017
More than half of Houston properties at high or moderate risk of flooding are not in FEMA flood zone
Properties outside of these zones are not required to carry flood insurance.
