flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Nail-Laminated Timber Design and Construction Guide released

Codes and Standards

Nail-Laminated Timber Design and Construction Guide released

New document focuses on design and construction considerations for horizontal NLT applications.


By Peter Fabris, Contributing Editor | June 8, 2017

Pixabay Public Domain

The Bi-national Softwood Lumber Council recently released the Nail-Laminated Timber (NLT) U.S. Design and Construction Guide.

The first-of-its-kind manual for the U.S. design and construction community was conceived and prepared by practitioners dedicated to advancing high-quality timber construction across industries, typologies, and geographies. Available for free download at reThinkWood.com, the guide provides direction to ensure safe, predictable, and economical use of NLT.

The document also offers practical strategies and guidance, including lessons learned from real-life projects. It is consistent with current codes and standards, including the 2015 International Building Code.

The guide focuses on design and construction considerations for horizontal NLT applications pertaining to U.S. construction practice and standards. Unlike other mass timber products, NLT does not require a unique manufacturing facility and can be fabricated with local dimension lumber for use in applications across sectors and building types. “Nail-laminated timber is a cost-effective solution for those looking to leverage the economic and environmental benefits of mass timber construction,” said Cees de Jager, General Manager of the Bi-national Softwood Lumber Council.

“While NLT has been incorporated into U.S. building codes for decades, available resources are dated and have been focused on prescriptive, rather than engineered applications," said Rebecca Holt, of Perkins + Will.

Related Stories

| Jun 5, 2012

AGC’s Safety and Health Conference focuses on regulations, legislation

More than 150 industry professionals and other attendees will participate in the Associated General Contractors of America’s (AGC’s) safety and health conference July 11-13 in Washington, D.C.

| Jun 1, 2012

New BD+C University Course on Insulated Metal Panels available

By completing this course, you earn 1.0 HSW/SD AIA Learning Units.

| May 31, 2012

Proposed change in Michigan’s building code would hurt innovation, say critics

Legislation pending before the Michigan Senate would change the law that calls for building codes to be updated every three years to require an update only every six years.

| May 31, 2012

Natural gas industry opposes federal carbon-neutral construction rule

The natural gas industry and some allies are working to block a federal green building rule that was expected to be a national model for carbon-neutral construction.

| May 31, 2012

Lawsuits push the legal boundaries of green building definition

This article explores some legal issues stemming from lawsuits in which plaintiffs have charged developers with not delivering on a promised level of sustainability.  

| May 31, 2012

ANSI approves Green Building Initiative’s design standard

The Green Building Initiative (GBI), a Portland, Ore. nonprofit organization, has had its new consensus-based standard for the design, construction, and operations of environmentally friendly buildings approved by the American National Standards Institute (ANSI).

| May 31, 2012

USGBC testing Minnesota buildings to see if they are living up to LEED standards

The Minnesota chapter of the U.S. Green Building Council (USGBC) has teamed up with EnergyPrint, a St. Paul, Minn. energy consulting firm, to study the energy and water use of more than 150 buildings in the state that have LEED certification.

| May 29, 2012

Reconstruction Awards Entry Information

Download a PDF of the Entry Information at the bottom of this page.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021