The Nail-Laminated Timber (NLT) Canadian Design and Construction Guide was released earlier this month.
“The guide provides inspiration and direction to ensure safe, predictable, and economical use of NLT, including practical strategies and guidance with lessons learned from real-life projects,” according to a news release.
“This is the only comprehensive NLT resource available that combines design, construction, and fabrication expertise from built projects into an easy-to-use reference,” Rebecca Holt, sustainable building advisor at Perkins+Will. Perkins+Will co-edited the document along with structural engineering firm Fast + Epp.
Unlike other mass timber products, NLT does not require a unique manufacturing facility and can be fabricated with local dimension lumber for use in applications across sectors and building types. “It is a cost-effective solution allowing projects to leverage the economic and environmental benefits of mass timber construction,” the release says.
The free guide focuses on design and construction for floor and roof systems considering Canadian construction practice and standards. The document offers guidance specific to the application of NLT for the range of disciplines engaged in design and construction.
Related Stories
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
| Nov 16, 2012
Green building councils in 62 countries expect 60% of their work to be green by 2015
More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.
| Nov 16, 2012
Voters approve fewer construction ballot measures in 2012 than in 2008
Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.
| Nov 9, 2012
New ANSI/BIFMA standard adds point for lower formaldehyde emissions
The ANSI/BIFMA e3-2012 Furniture Sustainability Standard now includes an additional point for furniture products that meet a new, lower formaldehyde emissions limit.
