Australia has many great surfing coasts, but for some in Melbourne it would be even better to have the option to catch some waves just steps from the city.
Enter the Docklands Surf Park, a project proposal by Arup and Damian Rogers Architecture that involves creating a massive wave pool of sorts near the city's Docklands neighborhood. The surfing pool would offer 98-foot-wide waves that would run the length of the 500-foot-long enclave, reports Australian newspaper The Age.
The project is in the very early stages of its proposal and still far from realization, but that hasn’t stopped the plan from garnering a lot of fanfare and support from Melburnians and surf enthusiasts.
As for the project’s reception from city officials, this is what surfing magazine Stab reports:
“Arup [is] seeking funding from developers and potential operators rather than the government, but Melbourne City Council and Places Victoria would still have to approve construction. Both [organizations] have met with Arup, and a council spokeswoman said it was an 'interesting concept' if private funding were available. The city of Melbourne has yet to officially back the project.”
More on the story at Gizmodo and The Age.
Related Stories
| Oct 25, 2011
Ritner Steel CEO elected to AISC Board
Freund will begin serving on the AISC board of directors, assisting with the organization's planning and leadership in the steel construction industry.
| Oct 25, 2011
Commitment to green building practices pays off
The study, conducted by the Pacific Northwest National Laboratory, built on a good indication of the potential for increased productivity and performance pilot research completed two years ago, with similarly impressive results.
| Oct 25, 2011
DOE issues report on financing solar photovoltaic systems for K-12 schools
The report examines the two primary types of ownership models used to obtain solar installations. This analysis can help school administrators across the country select the best option for deploying solar technologies in their school districts.
| Oct 25, 2011
MKK participates in BSA Engineering Merit Badge day
MKK principal Craig Watts attended the event as a representative of the MEP (mechanical/electrical/plumbing) engineering industry to give scouts an idea of what’s involved in becoming a mechanical engineer, and an overview of a typical day in the life of an engineer.
| Oct 24, 2011
FMI releases Adjust, Adapt, Act Study
The paper explores several case studies, including Sun Country Builders, Huen, BakerTriangle, Consigli, Skender Construction and Flatiron, and distills the key factors that make these companies unique and successful.
| Oct 24, 2011
BBS Architects & Engineers receives 2011 Sustainable Design Award from AIA Long Island Chapter
AIA LI also recognized BBS with the 2011 ARCHI Award Commendation for the St. Charles Resurrection Cemetery St. Charles Resurrection Cemetery Welcoming and Information Center in Farmingdale, NY.
| Oct 24, 2011
Kolbe adds 3-D models of direct set windows to BIM library?
Beveled Direct Set SketchUp and Revit Models available.
| Oct 20, 2011
UNT receives nation’s first LEED Platinum designation for collegiate stadium
Apogee Stadium will achieve another first in December with the completion of three wind turbines that will feed the electrical grid that powers the stadium.
| Oct 20, 2011
Process leads to new design values for southern pine and other visually graded dimension lumber
A summary of the process used to develop new design values will clarify many of the questions received by the SFPA.
