The December 2023 National Multifamily Report by Yardi Matrix highlights the highs and lows of the multifamily market in 2023. Despite strong demand, the year-over-year (YOY) growth for rent remained largely unchanged at 0.3 percent—a stark contrast to December 2022's 6.4% YOY increase.
According to Yardi Matrix, 2023's full-year rent growth of 0.3% is the weakest rent performance since the 0.2% increase in 2010 (barring the 2020 pandemic year's 0.1% gain). Negative rent growth is affecting several major metropolitan areas as well, with Austin, Texas, ending the year at a -5.7% growth rate. Other metros such as Orlando, Fla.; Portland, Ore.; Phoenix, Ariz.; and Atlanta, Ga.; all are down by at least 3% year-over-year.
Strong job market
Despite the multifamily market ending 2023 on a downswing, conditions may not be as weak as they appear. A strong job market continues to drive demand and shows signs of holding up following the Federal Reserve's rate hikes.
Also aiding in demand is net immigration, which has increased by more than one million annually, according to the report.
Occupancy rates
The national occupancy rate left December 2023 at 94.8 percent, unchanged from the previous month. Rates were either unchanged or down YOY in all but five markets: Chicago, Ill. (+0.2% YOY), Seattle, Wash. (+0.2% YOY), Denver, Colo. (+0.1% YOY), Washington, D.C. (+0.1% YOY), and the Twin Cities (+0.1% YOY).
Atlanta had the largest decline of the year, down 1.3 percent.
Overall outlook for multifamily housing in 2024
- Expenses, income, deliveries, and interest rates pose key challenges for the multifamily industry this year
- Though the market is expected to deliver over 500,000 units this year, there is a dramatic decrease in starts
- Recent interest rate declines alleviate potential distress for multifamily owners, but long-term stability remains uncertain
Related Stories
Codes and Standards | Feb 21, 2022
More bad news on sea level rise for U.S. coastal areas
A new government report predicts sea levels in the U.S. of 10 to 12 inches higher by 2050, with some major cities on the East and Gulf coasts experiencing damaging floods even on sunny days.
Urban Planning | Feb 14, 2022
5 steps to remake suburbs into green communities where people want to live, work, and play
Stantec's John Bachmann offers proven tactic for retrofitting communities for success in the post-COVID era.
Senior Living Design | Feb 11, 2022
Design for senior living: A chat with Rocky Berg, AIA
Rob Cassidy, Editor of MULTIFAMILY Design + Construction, chats with Rocky Berg, AIA, Principal with Dallas architecture firm three, about how to design senior living communities to meet the needs of the owner, seniors, their families, and staff.
Multifamily Housing | Feb 8, 2022
Suffolk to build Alba Palm Beach
The project will feature 55 residences.
| Feb 4, 2022
New apartment complex Dixon Place honors the history of Salt Lake City
Salt Lake City’s Sugar House neighborhood has been experiencing somewhat of a renaissance as of late, and the opening of new apartment community Dixon Place continues that trend. MVE + Partners took leadership in the design of the 59-unit, Class A development.
Sponsored | Steel Buildings | Jan 25, 2022
Multifamily + Hospitality: Benefits of building in long-span composite floor systems
Long-span composite floor systems provide unique advantages in the construction of multi-family and hospitality facilities. This introductory course explains what composite deck is, how it works, what typical composite deck profiles look like and provides guidelines for using composite floor systems. This is a nano unit course.
Multifamily Housing | Jan 20, 2022
Texas’ first cohousing residential community breaks ground in East End Houston
The design will include sustainability elements.
Coronavirus | Jan 20, 2022
Advances and challenges in improving indoor air quality in commercial buildings
Michael Dreidger, CEO of IAQ tech startup Airsset speaks with BD+C's John Caulfield about how building owners and property managers can improve their buildings' air quality.
Multifamily Housing | Jan 13, 2022
Astra Tower will be Salt Lake City’s tallest high-rise
HKS designed the project.
3D Printing | Jan 12, 2022
Using 3D-printed molds to create unitized window forms
COOKFOX designer Pam Campbell and Gate Precast's Mo Wright discuss the use of 3D-printed molds from Oak Ridge National Lab to create unitized window panels for One South First, a residential-commercial high-rise in Brooklyn, N.Y.