Mortenson Construction was selected by San Francisco-based developer, NaturEner, for the construction of the Rim Rock Wind Project. Located on nearly 21,000 acres approximately 20 miles north of NaturEner's Glacier I and 2 Wind projects, previously constructed by Mortenson, Rim Rock will generate189-megawatts of wind power -- enough energy to power approximately 66,000 homes.
Mortenson is responsible for the design and construction of access roads, foundations, erection of 126 Acciona 1.5-megawatt turbines, overhead and underground electrical collection system, (2) 230kV substations, the generator tie line, and an O&M facility. Construction began late October, proceeding through the winter months and is expected to be complete in October, 2012.
Montana's wind attributes are unique to the industry. According to AWEA, the state is ranked third in the U.S. for potential wind generating capacity, with more than 944,000 megawatts available for production. This much wind energy could produce more than 210 times the state's current electricity needs. Along with Montana's vast wind resources, the siting for this project was selected because of the ease of access to the property and the business-friendly development atmosphere in this part of Montana. BD+C
Related Stories
| May 15, 2013
Schneider Electric announces Global Xperience Efficiency Events for 2013
Schneider Electric’s Xperience Efficiency series will begin with events in the United States, China, Colombia, Brazil and Russia.
| May 15, 2013
Center for Green Schools, Architecture for Humanity release new tool for green schools
The 70-page guide demystifies the processes of identifying building improvement opportunities and finance and implementation strategies.
| May 14, 2013
Paints and coatings: The latest trends in sustainability
When it comes to durability, a 50-year building design ideally should include 50-year coatings. Many building products consume substantial amounts of energy, water, and petrochemicals during manufacture, but they can make up for it in the operations phase. The same should be expected from architectural coatings.
| May 14, 2013
Advanced turbines generate 6X more energy than conventional models
US-based wind energy company SheerWind just unveiled the INVELOX – a tunnel-based wind turbine that can produce up to 600% more power than traditional wind turbines.
| May 14, 2013
Raymond Clark joins HOK’s Chicago Practice as Management Principal
HOK announced today that Raymond Clark, AIA, LEED AP, has joined its leadership team in Chicago as senior vice president and management principal.
| May 14, 2013
Easy net-zero energy buildings [infographic]
"Be a Zero Hero" infographic educates building industry professionals on ultra energy-efficient structural insulated panel construction
| May 9, 2013
10 high-efficiency plumbing fixtures
From a "no sweat" toilet to a deep-well lavatory, here's a round up of the latest high-efficiency plumbing fixtures.
| May 9, 2013
Post-tornado Greensburg, Kan., leads world in LEED-certified buildings per capita
Six years after a tornado virtually wiped out the town, Greensburg, Kan., is the world's leading community in LEED-certified buildings per capita.
| May 8, 2013
Preventable curtain wall failures - AIA/CES course
In many cases, curtain wall failures are caused by fairly simple errors that occur during the fabrication and installation process. This presentation will highlight common errors and when they typically occur.
