Mortenson Construction was selected by San Francisco-based developer, NaturEner, for the construction of the Rim Rock Wind Project. Located on nearly 21,000 acres approximately 20 miles north of NaturEner's Glacier I and 2 Wind projects, previously constructed by Mortenson, Rim Rock will generate189-megawatts of wind power -- enough energy to power approximately 66,000 homes.
Mortenson is responsible for the design and construction of access roads, foundations, erection of 126 Acciona 1.5-megawatt turbines, overhead and underground electrical collection system, (2) 230kV substations, the generator tie line, and an O&M facility. Construction began late October, proceeding through the winter months and is expected to be complete in October, 2012.
Montana's wind attributes are unique to the industry. According to AWEA, the state is ranked third in the U.S. for potential wind generating capacity, with more than 944,000 megawatts available for production. This much wind energy could produce more than 210 times the state's current electricity needs. Along with Montana's vast wind resources, the siting for this project was selected because of the ease of access to the property and the business-friendly development atmosphere in this part of Montana. BD+C
Related Stories
| May 30, 2017
Accelerate Live! talk: Finding the money for your clients' projects, Paul Westlake, Jr., DLR Group|WRL
Architect Paul Westlake, Jr., shares his methods for adding value to projects through creative financing.
| May 30, 2017
Accelerate Live! talk: Health-generating buildings, Marcene Kinney, Angela Mazzi, GBBN Architects
Architects Marcene Kinney and Angela Mazzi share design hacks pinpointing specific aspects of the built environment that affect behavior, well-being, and performance.
Daylighting | May 30, 2017
Sun, sky brightness, and glow: Making the most of daylight [AIA course]
To some project teams, “daylighting” means using glass area to admit direct sunlight, period.
Security/Fire Protection | May 30, 2017
Security begins when you close the door [AIA course]
Selecting door and window systems for any building project demands a complete articulation of safety and security concerns.
Codes and Standards | May 30, 2017
Industry Groups move toward Unified Green Building Model Code in 2018
The effort involves combining ASHRAE's Standard 189.1 with the International Green Construction Code.
Codes and Standards | May 30, 2017
Florida preparing to adjust to new building elevation requirements
New floodplain maps and state code changes loom.
Codes and Standards | May 30, 2017
Heated debate over whether Calif.’s prevailing wage requirement stymies affordable housing
There’s disagreement around how much pay regulations add to cost of projects.
Reconstruction & Renovation | May 30, 2017
Achieving deep energy retrofits in historic and modern-era buildings [AIA course]
Success in retrofit projects requires an entirely different mindset than in new construction, writes Randolph Croxton, FAIA, LEED AP, President of Croxton Collaborative Architects.
Architects | May 26, 2017
Innovations in addressing homelessness
Parks departments and designers find new approaches to ameliorate homelessness.
Architects | May 26, 2017
BIG plans: Architecture isn’t Bjarke Ingels Group’s only growth path
Kai-Uwe Bergmann, the firm’s head of global business development, says engineering and urban planning are key opportunities. And how about that Hyperloop?