More than half of residential and commercial properties in Houston that are at high or moderate risk of flooding are not included in the Federal Emergency Management Agency's Special Flood Hazard Areas (SFHA), according to CoreLogic.
Properties outside those zones don't need flood insurance, so many flood victims of Hurricane Harvey will not have access to insurance reimbursements to make repairs. About 52% of residential and commercial properties in the Houston metro are at “High” or “Moderate” risk of flooding, but are not in a (SFHA), CoreLogic says.
Less than two weeks before Harvey, President Trump did away with the Obama-era Federal Flood Risk Management Standard that required federally funded construction in flood-prone areas to be built to higher resilience standards. There are concerns that rebuilding in Houston will not be done according to the more stringent standards that in some cases require structures to be built at higher elevations.
FEMA had proposed that most construction projects using federal funds be built 2 feet above the 100-year floodplain. Hospitals and other "critical action" projects would have been required to be built 3 feet above that floodplain. The higher elevation could mean the difference between full hospital functionality and a complete failure of electrical, plumbing, and mechanical systems, according to an NBBJ healthcare partner quoted in a Modern Healthcare report.
Related Stories
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
Codes and Standards | Apr 26, 2018
New standard supports community resilience
ASTM International guidance supports cost-effective ways to withstand and recover from disasters.
Codes and Standards | Apr 25, 2018
Lessons learned from decades of Superfund cleanups guide contaminated land reuse
Sites repurposed for residential, commercial use, and solar energy generation.
Codes and Standards | Apr 24, 2018
Vibrant downtown core the key for urban multifamily development
Nighttime activity makes the difference.
Codes and Standards | Apr 19, 2018
ILFI launches new Zero Carbon Certification
Offers greater flexibility around project fuel types and offsetting renewables.