flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

More designers focusing on acoustic properties of buildings

Codes and Standards

More designers focusing on acoustic properties of buildings

Recognition that structures should be acoustically satisfying.


By Peter Fabris, Contributing Editor | August 8, 2019
More designers focusing on acoustic properties of buildings, wellness design

Courtesy Pixabay 

A growing number of designers are paying close attention to the acoustic properties of buildings, according to a BBC Future report.

With studies indicating that noisy work and home settings are linked to depression, anxiety, and reduced performance, architects are recognizing that buildings not only need to be functional and aesthetically pleasing, but also acoustically satisfying.

Up to now, mainstream architecture typically focused on a building’s acoustic properties only in the construction of concert halls and performance spaces.

New virtual reality systems using acoustic modeling software enable architects to listen to how the spaces they design might sound like through aural simulations of structures. One researcher is studying spaces with exemplary acoustic qualities to create an algorithm or a computational routine that architects can use when designing buildings.

It may be possible for structures to cancel out noise by exploiting the physics of sound interference. A sound wave at the right frequency and wavelength can counteract the sound waves of unwanted noises.

Related Stories

Codes and Standards | Feb 4, 2021

2021 IBC requires automatic doors for entrances to public buildings

One door must be either a full power-operated door or a low-energy power-operated door.

Codes and Standards | Feb 3, 2021

Two new International Code Council online code tools released

Offer detailed information about global building code usage and U.S. adoptions.

Codes and Standards | Feb 2, 2021

Biden tells OSHA to bolster COVID-19 safety rules

Order could lead to a national playbook for fighting COVID-19 on jobsites.

Codes and Standards | Feb 1, 2021

Fenestration Alliance updates standard for mulled combination assemblies

Last updated in 2010, document describes procedures and requirements for air leakage, water resistance, and structural performance.

Codes and Standards | Jan 28, 2021

Natl. Fire Protection Assn. releases new energy storage system fact sheet

Comes as Biden Administration prepares ambitious clean energy agenda.

Codes and Standards | Jan 27, 2021

AECOM sues insurance carrier for payment of COVID-19 property damage claims

Claims ‘all-risk policies’ should have included millions of dollars of losses due to virus.

Codes and Standards | Jan 26, 2021

Updated guide to repair and rehabilitate existing concrete structures published

Document assesses how to adhere to code requirements.

Codes and Standards | Jan 25, 2021

New guide for skylight selection, daylighting design released

Free Fenestration and Glazing Industry Alliance document now available.

Codes and Standards | Jan 20, 2021

Steel industry, labor urge Biden to retain steel tariffs

‘Essential to ensuring the viability of the domestic steel industry.’

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021