flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

More designers focusing on acoustic properties of buildings

Codes and Standards

More designers focusing on acoustic properties of buildings

Recognition that structures should be acoustically satisfying.


By Peter Fabris, Contributing Editor | August 8, 2019
More designers focusing on acoustic properties of buildings, wellness design

Courtesy Pixabay 

A growing number of designers are paying close attention to the acoustic properties of buildings, according to a BBC Future report.

With studies indicating that noisy work and home settings are linked to depression, anxiety, and reduced performance, architects are recognizing that buildings not only need to be functional and aesthetically pleasing, but also acoustically satisfying.

Up to now, mainstream architecture typically focused on a building’s acoustic properties only in the construction of concert halls and performance spaces.

New virtual reality systems using acoustic modeling software enable architects to listen to how the spaces they design might sound like through aural simulations of structures. One researcher is studying spaces with exemplary acoustic qualities to create an algorithm or a computational routine that architects can use when designing buildings.

It may be possible for structures to cancel out noise by exploiting the physics of sound interference. A sound wave at the right frequency and wavelength can counteract the sound waves of unwanted noises.

Related Stories

| Feb 22, 2012

ACI BIM manual for cast-in-place concrete in development

The improved communication, coordination, and collaboration afforded by BIM implementation have already been shown to save time and money in projects.

| Feb 20, 2012

Comment period for update to USGBC's LEED Green Building Program now open

This third draft of LEED has been refined to address technical stringency and rigor, measurement and performance tools, and an enhanced user experience.

| Feb 20, 2012

GAF introduces web portal for architects and specifiers

The new portal offers a clean look with minimal clutter to make it easier to find the technical information and product data that architects need.

| Feb 17, 2012

AGC advocates for federal procurement reform

Ensure that small business goals take into consideration actual small business capacity in relevant specialty markets.

| Feb 17, 2012

Codes not to blame for Anchorage roof collapses following heavy snows

Design or construction problems likely contributed to the collapses, according to city officials.

| Feb 17, 2012

Comment period opens March 1 for LEED 2012 update

USGBC says that LEED's strength comes from its continuous evolution.

| Feb 17, 2012

OSHA training videos on proper respirator use available online

17 short videos to help workers learn about the proper use of respirators on the job.

| Feb 17, 2012

Union/employer collaboration on the rise aimed at exceeding OSHA safety standards

Unions have learned to help employers win contracts with bids made competitive through good safety practices.

| Feb 16, 2012

Gain greater agility and profitability with ArchiCAD BIM software

White paper was written with the sole purpose of providing accurate, reliable information about critical issues related to BIM and what ArchiCAD with advanced technology such as the GRAPHISOFT BIM Server provide as an answer to address these issues.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021