A growing number of designers are paying close attention to the acoustic properties of buildings, according to a BBC Future report.
With studies indicating that noisy work and home settings are linked to depression, anxiety, and reduced performance, architects are recognizing that buildings not only need to be functional and aesthetically pleasing, but also acoustically satisfying.
Up to now, mainstream architecture typically focused on a building’s acoustic properties only in the construction of concert halls and performance spaces.
New virtual reality systems using acoustic modeling software enable architects to listen to how the spaces they design might sound like through aural simulations of structures. One researcher is studying spaces with exemplary acoustic qualities to create an algorithm or a computational routine that architects can use when designing buildings.
It may be possible for structures to cancel out noise by exploiting the physics of sound interference. A sound wave at the right frequency and wavelength can counteract the sound waves of unwanted noises.
Related Stories
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
Codes and Standards | Feb 17, 2017
New energy design guide for metal building systems now available
The second edition incorporates more recent IECC and ASHRAE standards.
Codes and Standards | Feb 14, 2017
Paper outlines how BREEAM credits can be used for WELL standard compliance
The paper provides guidance on how to streamline pursuit of dual certification.
Codes and Standards | Feb 14, 2017
Evidence mounts on health, productivity benefits of sustainable work spaces
High-performance green buildings are linked to better job performance.
