Though overall 2012 merger and acquisition (M&A) activity in the engineering and construction industry did not meet levels seen in 2011, an uptick in fourth quarter activity points to signs of recovery, according to Engineering Growth, a quarterly analysis of the global engineering and construction industry by consultant PwC US.
“With the continued elevated level of uncertainty through the end of the year, we saw many deal makers staying on the sidelines or engaging in smaller, bolt-on acquisitions. However, as the global engineering and construction sector continues on its path of slow recovery, we remain cautiously optimistic and expect the M&A arena to follow a similar trajectory of modest growth in 2013. Growing infrastructure needs, expanding urbanization, and the need for cleaner, environmentally friendly and sustainable energy and water continue to be the driving forces of M&A activity in the sector,” said H. Kent Goetjen, U.S. engineering and construction leader with PwC.
In 2012, there were 168 deals (with values of $50 million or more) totaling $49.3 billion, compared with 181 transactions worth $73.3 billion in 2011. Overall 2012 M&A volume and value declined compared with 2011 levels, but the sector did see increased activity in the fourth quarter of 2012: 57 deals totaling $13.9 billion, an increase in value and volume compared with the third quarter of 2012 (31 transactions totaling $10.8 billion).
Despite the slowdown in engineering and construction dealmaking, financial investors continue to slowly gain momentum. In 2012, the participation of financial advisors was higher than the average 10-year rate of about 33 percent of financial acquirers and they were an active participant in some of the largest deals during the year, potentially suggesting signs of recovery and opportunity in the sector.
Transactions in the construction materials category led deals in the full year of 2012 in both value and volume with 46 deals over $50 million totaling $16.57 billion, outnumbering the construction segment, the usual leader and second in terms of volume in 2012. Multiple large and mega deals throughout 2012, including the only mega-deal in the fourth quarter, involved targets associated with the construction materials segment (notably, cement and concrete), contributing to a 70% increase in value in the segment’s deals over 2011.
The majority of engineering and construction transactions in 2012 were local deals, for both U.S. targets and targets and acquirers from other parts of the world. Asia and Oceania remained the most active region in engineering and construction dealmaking, representing 68 deals totaling $15.09 billion in 2012, followed by Europe and North America. The United States was the most active individual nation, engaging in the largest number of deals and also tending to generate higher deal values due to the relative maturity, size, and financial stability of U.S.-affiliated dealmakers.
For a copy of Engineering Growth, visit: www.pwc.com/us/
Related Stories
| Aug 11, 2010
News Briefs: GBCI begins testing for new LEED professional credentials... Architects rank durability over 'green' in product attributes... ABI falls slightly in April, but shows market improvement
News Briefs: GBCI begins testing for new LEED professional credentials... Architects rank durability over 'green' in product attributes... ABI falls slightly in April, but shows market improvement
| Aug 11, 2010
University of Florida's traditionally modern graduate building
The University of Florida's Hough Hall Graduate Studies Building was designed by Rowe Architects, Tampa, and Sasaki Associates, Boston, to blend with the school's traditional collegiate gothic architecture outside, but reflect a 21st-century education facility inside. Tallahassee-based Ajax Building Corporation is constructing the $19 million facility, which will have traditional exterior detai...
| Aug 11, 2010
Florida International University's cantilevered design
Suffolk Construction's Miami-Dade business unit is serving as GC for the $14 million School of International and Public Affairs building at the University Park Campus of Florida International University. Designed by Arquitectonica, Miami, the five-story, 58,408-sf building will have a café and three auditoriums on the ground level; the largest auditorium will have a 40-foot cantilever abov...
| Aug 11, 2010
Restoration gives new life to New Formalism icon
The $30 million upgrade, restoration, and expansion of the Mark Taper Forum in Los Angeles was completed by the team of Rios Clementi Hale Studios (architect), Harley Ellis Devereaux (executive architect/MEP), KPFF (structural engineer), and Taisei Construction (GC). Work on the Welton Becket-designed 1967 complex included an overhaul of the auditorium, lighting, and acoustics.
| Aug 11, 2010
Best AEC Firms to Work For
2006 FreemanWhite Hnedak Bobo Group McCarthy Building Companies, Inc. Shawmut Design and Construction Walter P Moore 2007 Anshen+Allen Arup Bovis Lend Lease Cannon Design Jones Lang LaSalle Perkins+Will SmithGroup SSOE, Inc. Timothy Haahs & Associates, Inc. 2008 Gilbane Building Co. HDR KJWW Engineering Consultants Lord, Aeck & Sargent Mark G.
| Aug 11, 2010
Great Solutions: Business Management
22. Commercial Properties Repositioned for University USE Tocci Building Companies is finding success in repositioning commercial properties for university use, and it expects the trend to continue. The firm's Capital Cove project in Providence, R.I., for instance, was originally designed by Elkus Manfredi (with design continued by HDS Architects) to be a mixed-use complex with private, market-...
| Aug 11, 2010
AIA Course: Historic Masonry — Restoration and Renovation
Historic restoration and preservation efforts are accelerating throughout the U.S., thanks in part to available tax credits, awards programs, and green building trends. While these projects entail many different building components and systems, façade restoration—as the public face of these older structures—is a key focus. Earn 1.0 AIA learning unit by taking this free course from Building Design+Construction.
| Aug 11, 2010
BIM adoption tops 80% among the nation's largest AEC firms, according to BD+C's Giants 300 survey
The nation's largest architecture, engineering, and construction companies are on the BIM bandwagon in a big way, according to Building Design+Construction's premier Top 50 BIM Adopters ranking, published as part of the 2009 Giants 300 survey. Of the 320 AEC firms that participated in Giants survey, 83% report having at least one BIM seat license in house, half have more than 30 seats, and near...
| Aug 11, 2010
Integrated Project Delivery builds a brave, new BIM world
Three-dimensional information, such as that provided by building information modeling, allows all members of the Building Team to visualize the many components of a project and how they work together. BIM and other 3D tools convey the idea and intent of the designer to the entire Building Team and lay the groundwork for integrated project delivery.
| Aug 11, 2010
Great Solutions: Healthcare
11. Operating Room-Integrated MRI will Help Neurosurgeons Get it Right the First Time A major limitation of traditional brain cancer surgery is the lack of scanning capability in the operating room. Neurosurgeons do their best to visually identify and remove the cancerous tissue, but only an MRI scan will confirm if the operation was a complete success or not.