flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Modest growth predicted for engineering, construction mergers

Modest growth predicted for engineering, construction mergers

Small and mid-market deals and construction materials drive activity; U.S. is the most active individual nation.


By Posted by Julie S. Higginbotham, Senior Editor | February 8, 2013
Mergers and acquisitions in the construction industry picked up steam in late 20
Mergers and acquisitions in the construction industry picked up steam in late 2012.

 

Though overall 2012 merger and acquisition (M&A) activity in the engineering and construction industry did not meet levels seen in 2011, an uptick in fourth quarter activity points to signs of recovery, according to Engineering Growth, a quarterly analysis of the global engineering and construction industry by consultant PwC US.

“With the continued elevated level of uncertainty through the end of the year, we saw many deal makers staying on the sidelines or engaging in smaller, bolt-on acquisitions. However, as the global engineering and construction sector continues on its path of slow recovery, we remain cautiously optimistic and expect the M&A arena to follow a similar trajectory of modest growth in 2013. Growing infrastructure needs, expanding urbanization, and the need for cleaner, environmentally friendly and sustainable energy and water continue to be the driving forces of M&A activity in the sector,” said H. Kent Goetjen, U.S. engineering and construction leader with PwC.

In 2012, there were 168 deals (with values of $50 million or more) totaling $49.3 billion, compared with 181 transactions worth $73.3 billion in 2011. Overall 2012 M&A volume and value declined compared with 2011 levels, but the sector did see increased activity in the fourth quarter of 2012: 57 deals totaling $13.9 billion, an increase in value and volume compared with the third quarter of 2012 (31 transactions totaling $10.8 billion). 

Despite the slowdown in engineering and construction dealmaking, financial investors continue to slowly gain momentum. In 2012, the participation of financial advisors was higher than the average 10-year rate of about 33 percent of financial acquirers and they were an active participant in some of the largest deals during the year, potentially suggesting signs of recovery and opportunity in the sector. 

Transactions in the construction materials category led deals in the full year of 2012 in both value and volume with 46 deals over $50 million totaling $16.57 billion, outnumbering the construction segment, the usual leader and second in terms of volume in 2012. Multiple large and mega deals throughout 2012, including the only mega-deal in the fourth quarter, involved targets associated with the construction materials segment (notably, cement and concrete), contributing to a 70% increase in value in the segment’s deals over 2011.

The majority of engineering and construction transactions in 2012 were local deals, for both U.S. targets and targets and acquirers from other parts of the world. Asia and Oceania remained the most active region in engineering and construction dealmaking, representing 68 deals totaling $15.09 billion in 2012, followed by Europe and North America. The United States was the most active individual nation, engaging in the largest number of deals and also tending to generate higher deal values due to the relative maturity, size, and financial stability of U.S.-affiliated dealmakers. 

For a copy of Engineering Growth, visit: www.pwc.com/us/industrialproducts

Related Stories

| Feb 14, 2014

Scrap tires used to boost masonry blocks at Missouri University of S&T

Research could lead to blocks that use waste material and have seismic and insulating benefits.

| Feb 14, 2014

Giant interactive pinwheel adds fun to museum exterior

The proposed design for the Santa Cruz Museum of Art and History features a 10-foot pinwheel that can be activated by passersby.

| Feb 14, 2014

First look: Kentucky's Rupp Arena to get re-clad as part of $310M makeover

Rupp Arena will get a 40-foot high glass façade and a new concourse, but will retain many of its iconic design elements.

| Feb 14, 2014

The Technology Report 2014: Top tech tools and trends for AEC professionals

In this special five-part report, Building Design+Construction explores how Building Teams throughout the world are utilizing advanced robotics, 3D printers, drones, data-driven design, and breakthroughs in building information modeling to gain efficiencies and create better buildings. 

| Feb 13, 2014

Why you should start with a builder

They say the best way to eat an elephant is one bite at a time. Expanding your building or constructing a new structure for your business, church, or school isn’t all that different. Attacking it is best done in small, deliberate pieces. 

| Feb 13, 2014

Related Companies, LargaVista partner to develop mixed-use tower in SoHo

The site is located at the gateway to the booming SoHo retail market, where Class A office space is scarce yet highly in demand.

| Feb 12, 2014

First Look: Futuristic Silicon Valley campus designed to draw tech startups

The curved campus will consist of four different buildings, one exclusively for amenities like a coffee bar, bike shop, and bank.

| Feb 11, 2014

Adobe Photoshop update features new 3D printing capabilities

Available as part of an update to Photoshop Creative Cloud, the tool enables users to easily and reliably build, refine, preview, prepare, and print 3D designs.

| Feb 10, 2014

Architecture Design Collaborative announces firm opening in Southern California

Today, Architecture Design Collaborative officially announces the launch of its firm providing a full range of architecture and interior design services nationwide. Architecture Design Collaborative offers architectural design services, comprehensive interior design services, developer collaboration, direct tenant improvement, repositioning and site planning.

| Feb 10, 2014

Ball State to host Geothermal Conference on design, drilling and equipment - April 10, 2014

To best serve the industry, Ball State University has organized a single day conference in which participants will be able to exchange technical notes, develop understandings and share experiences with design, drilling, and equipment issues related to geothermal ground source heat pump technology.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021