flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Modern codes, construction techniques saved structures in Maui wildfire

Codes and Standards

Modern codes, construction techniques saved structures in Maui wildfire

Fire-resistant roof coverings, non-combustible exterior walls, wind-rated attic vents cited in IBHS report


By Peter Fabris, Contributing Editor | September 25, 2023
Modern codes, construction techniques saved structures in Maui wildfire - Photo: Army National Guard Staff Sgt. Matthew A. Foster, Department of Defense
Photo: Army National Guard Staff Sgt. Matthew A. Foster, Department of Defense

Modern building codes and construction techniques were effective in saving buildings from the devastating Maui wildfire on August 9th, according to a recent report, IBHS Early Insights Lahaina Fire—2023, from the Insurance Institute for Business and Home Safety’s research division.

The report cited a residential development, consisting of a mix of single-family homes and a cluster of multifamily units built between 2019 and 2020, that escaped destruction. The structures survived the conflagration at least partly due to fire retardant construction and modern building codes, the report says.

The exteriors of several of these buildings did ignite, but they were not consumed by flames. “Hawaii’s modern building code has high-wind requirements that introduced elements that helped newer construction resist wildfire conditions,” the report says.

Despite the buildings being located close together, the development was spared in part because of:

  • Class A roof covers—specifically asphalt shingles and metal
  • Non-combustible exterior wall materials
  • High wind-rated attic vents that prevented embers from entering the attic space

Notably, the report adds that landscape vegetation did not cover as much ground as it did in other locations that were destroyed by the fire. This provided less fuel for the flames to jump from one structure to another.

Related Stories

| Apr 5, 2013

Builders Hardware Manuf. Assn. revises three standards for hinges, locks, and latches

The Builders Hardware Manufacturers Association (BHMA) released three new revisions to the ANSI/BHMA standardsfor hinges, interconnected locks, and sliding and folding hardware.

| Apr 5, 2013

New items to ASHRAE/IES energy standard open for public comment

The 2013 version of the ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low-Rise Residential Buildings, is scheduled for publication later this year, and 26 proposed addenda are open for public comment.

| Apr 5, 2013

No evidence that mandatory building energy labeling improves efficiency, study says

The Building Owners and Managers Association (BOMA) International and the Greater Boston Real Estate Board (GBREB) released a report, “An Economic Perspective on Building Labeling Policies,” that questions the efficacy of mandatory building energy labeling.

| Mar 27, 2013

Practical application of Legionella prevention standards the focus of ASHRAE project

An American Society of Heating, Refrigerating and Air-Conditioning Engineers committee drafting tough new standards to prevent the waterborne bacteria Legionella is focused on how to apply the standards in the real world.

| Mar 27, 2013

Open discussion of regulations on tap at AGC’s 2013 Federal Contractors Conference

The AGC Federal Contractors Conference provides a venue for contractors and federal agency personnel to meet in a collaborative forum to review federal construction contracting issues from around the United States.

| Mar 27, 2013

New BACnet standard offers significant improvements to alarm handling

Changes to the newly published BACnet standard from ASHRAE will encourage smart building automation controls systems including alarms.

| Mar 27, 2013

CEIR releases tool that measures energy, environmental benefits of roof systems

The Center for Environmental Innovation in Roofing (CEIR) released its new RoofPoint Energy and Carbon Calculator that is designed to help roofing professionals measure the energy and environmental benefits of modern roof system technologies.

| Mar 27, 2013

Sustainable wood controversy leads to LEED ‘backlash bill’ in Florida House

A Florida House bill that says state agencies should decide on a project-by-project basis which green certification standards are used on state construction passed a subcommittee vote 12-1.

| Mar 19, 2013

Colorado Zero Energy District project shows how businesses can reach zero-energy standard

An ambitious experiment in Fort Collins, Colo., is supporting development of the nation’s first major urban zero-energy district.

| Mar 19, 2013

New LEED for Neighborhood Development and Historic Preservation guide released

A new guidance manual, LEED for Neighborhood Development and Historic Preservation, outlines strategies geared towards helping building teams incorporate historic resources into their developments.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021