flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Michel Bruneau wins 2012 AISC T.R. Higgins Award

Michel Bruneau wins 2012 AISC T.R. Higgins Award


By By BD+C Staff | October 18, 2011
Michel Bruneau is being honored for his papers on steel plate shear wall design published in AISC's Engineering Journaland the p

Michel Bruneau, Ph.D., P.E., professor of civil, structural, and environmental engineering (CSEE) at the University of Buffalo, N.Y., is the 2012 recipient of the prestigious AISC T.R. Higgins Lectureship Award. Bruneau is being honored for his papers on steel plate shear wall design published in AISC's Engineering Journaland the proceedings of the Canadian Conference on Earthquake Engineering.

The AISC T.R. Higgins Lectureship Award is presented annually by the American Institute of Steel Construction (AISC) and recognizes an outstanding lecturer and author whose technical paper(s) are considered an outstanding contribution to the engineering literature on fabricated structural steel. The award, which includes a $15,000 prize, will be presented at the 2012 NASCC: The Steel Conference (www.aisc.org/nascc) at the Gaylord Texan Convention Center in Dallas, April 18-21.

"The Higgins jury quickly identified Michel as a top candidate, and the subsequent discussions and deliberations served to further elevate him," said Charlie Carter, AISC vice president and chief structural engineer. "The jury noted in particular the impressive extent and breadth of Michel's contributions as a researcher and engineer."

Each year the AISC Education Foundation invites a distinguished panel of industry experts to judge the nominations. The jury reflects a blend of professional insight, industry experience and academic excellence. The following jurors collaborated to select Bruneau as the recipient of this year's award:

  • Jerome F. Hajjar, Ph.D., P.E., professor and chair, Northeastern University, Boston
  • Mark V. Holland, P.E., chief engineer, Paxton & Vierling Steel Company, Omaha, Neb.
  • Lawrence F. Kruth, P.E., vice president of engineering, technology & safety, Douglas Steel Fabricating Corporation, Lansing, Mich.
  • Patrick McManus, Ph.D., P.E., S.E., structural technical director, Martin/Martin, Inc., Lakewood, Colo.
  • Ralph M. Richard, Ph.D., P.E., professor emeritus, University of Arizona, Tucson
  • Rafael Sabelli, S.E., director of seismic design, Walter P Moore, San Francisco

Bruneau's abundant research includes the evaluation and retrofit of existing steel bridges and buildings subjected to large destructive forces up to collapse, as well as the development of new design concepts capable of providing satisfactory seismic-resistance, blast-resistance, or both simultaneously as multi-hazard resistant concepts. This research has encompassed contributions to the development and large-scale experimental validation of various energy-dissipating design concepts to enhance the resilience of structures against extreme events: ductile steel plate shear walls, ductile bridge diaphragms, tubular eccentrically braced frames, structural fuses and controlled-rocking piers.

He has conducted numerous exploration visits to disaster stricken areas and is a member of several professional and technical code-writing committees. He also served as Director (2003-2008) and Deputy Director (1998-2003) of the Multidisciplinary Center for Earthquake Engineering Research, a National Center of Excellence funded by the National Science Foundation, the Federal Highway Administration and others. His past service to the profession includes participation in expert peer review panels, project advisory committees, special project design teams, conference advisory committees and journal editorial boards. Prior to his appointment in academia, he practiced as a consultant for architecture and engineering firms Morrison Hershfield Limited (Toronto), and Buckland and Taylor (Vancouver).

Bruneau has authored or co-authored numerous publications, including more than 100 referred journal papers, 200 papers in conference proceedings and two fiction books. He has received several awards for his technical work, as well as for his latest novel.

The AISC T.R. Higgins Award is named for Theodore R. Higgins, Ph.D., former AISC director of engineering and research, who was widely acclaimed for his many contributions to the advancement of engineering technology related to fabricated structural steel. The award honors Higgins for his innovative engineering, timely technical papers and distinguished lectures. For more information on this prestigious award, please visit www.aisc.org/TRHigginsAward.

Recent T.R. Higgins recipients include: Charles W. Roeder (2011) for his paper on Gusset Plate Connections for Seismic Design; James O. Malley (2010) for his paper on the 2005 AISC Seismic Provisions for Structural Steel Buildings, published in the First Quarter 2007 AISC Engineering Journal; Donald W. White (2009) for his papers on stability analysis and design and the flexural provisions of the 2005 AISC Specification for Structural Steel Buildings; and Walterio Lopez and Rafael Sabelli (2008) for their paper on the seismic design of buckling-restrained braced frames. BD+C

Related Stories

| Aug 11, 2010

Architecture Billings Index flat in May, according to AIA

After a slight decline in April, the Architecture Billings Index was up a tenth of a point to 42.9 in May. As a leading economic indicator of construction activity, the ABI reflects the approximate nine to twelve month lag time between architecture billings and construction spending. Any score above 50 indicates an increase in billings.

| Aug 11, 2010

Architecture Billings Index drops to lowest level since June

Another stall in the recovery for the construction industry as the Architecture Billings Index (ABI) dropped to its lowest level since June. The American Institute of Architects (AIA) reported the August ABI rating was 41.7, down slightly from 43.1 in July. This score indicates a decline in demand for design services (any score above 50 indicates an increase in billings).

| Aug 11, 2010

RTKL names Lance Josal president and CEO

Lance K. Josal FAIA has been named President and CEO of RTKL Associates Inc., the international planning, design and engineering firm. Josal succeeds RTKL’s current President and CEO, David C. Hudson AIA, who is retiring from the firm. The changes will take effect on 1 September 2009.

| Aug 11, 2010

Balfour Beatty agrees to acquire Parsons Brinckerhoff for $626 million

Balfour Beatty, the international engineering, construction, investment and services group, has agreed to acquire Parsons Brinckerhoff for $626 million. Balfour Beatty executives believe the merger will be a major step forward in accomplishing a number of Balfour Beatty’s objectives, including establishing a global professional services business of scale, creating a leading position in U.S. civil infrastructure, particularly in the transportation sector, and enhancing its global reach.

| Aug 11, 2010

Construction unemployment rises to 17.1% as another 64,000 construction workers are laid off in September

The national unemployment rate for the construction industry rose to 17.1 percent as another 64,000 construction workers lost their jobs in September, according to an analysis of new employment data released today.  With 80 percent of layoffs occurring in nonresidential construction, Ken Simonson, chief economist for the Associated General Contractors of America, said the decline in nonresidential construction has eclipsed housing’s problems.

| Aug 11, 2010

Billings at U.S. architecture firms exceeds $40 billion annually

In the three-year period leading up to the current recession, gross billings at U.S. architecture firms increased nearly $16 billion from 2005 and totaled $44.3 billion in 2008. This equates to 54 percent growth over the three-year period with annual growth of about 16 percent. These findings are from the American Institute of Architects (AIA) Business of Architecture: AIA Survey Report on Firm Characteristics.

| Aug 11, 2010

CHPS debuts high-performance building products database

The Collaborative for High Performance Schools (CHPS) made a new tool available to product manufacturers to help customers identify building products that contribute to sustainable, healthy, built environments. The tool is an online, searchable database where manufacturers can list products that have met certain environmental or health standards ranging from recycled content to materials that contribute to improved indoor air quality.

| Aug 11, 2010

ICC launches green construction code initiative for commercial buildings

The International Code Council has launched its International Green Construction Code (IGCC) initiative, which will aim to reduce energy usage and the carbon footprint of commercial buildings.Entitled “IGCC: Safe and Sustainable By the Book,” the initiative is committed to develop a model code focused on new and existing commercial buildings. It will focus on building design and performance.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021