flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Meyer receives RCMA's Martin A. Davis Industry Leadership Award

Meyer receives RCMA's Martin A. Davis Industry Leadership Award

The Martin A. Davis Industry Leadership Award is presented annually to an individual, selected by his or her peers, who has exemplified outstanding service and made significant contributions to the roof coatings industry.


By By BD+C Staff | April 3, 2012
Tom Meyer, technical director at Coating & Foam Solutions, is the recipient of t
Tom Meyer, technical director at Coating & Foam Solutions, is the recipient of the RCMA's Martin A. Davis Industry Leadership Aw
This article first appeared in the May 2012 issue of BD+C.

The Roof Coatings Manufacturers Association (RCMA), a national trade association representing manufacturers of cold applied protective roof coatings, cements, and suppliers of industry products, recently awarded Tom Meyer, technical director at Coating & Foam Solutions, as the recipient of the RCMA's prestigious Martin A. Davis Industry Leadership Award for 2012.

Meyer is the 28th recipient of the Martin A. Davis Industry Leadership Award and was presented with this honor at this year’s RCMA Annual Meeting, February 20, 2012, at the Rosen Plaza Hotel in Orlando, Fla. The Martin A. Davis Industry Leadership Award is the highest honor bestowed by the Roof Coatings Manufacturers Association. The award is presented annually to an individual, selected by his or her peers, who has exemplified outstanding service and made significant contributions to the roof coatings industry. The award was first presented in 1985 posthumously to one of RCMA's visionary founding members, Martin A. Davis, and subsequently designated in his memory.

Meyer currently serves as a member of the RCMA Board of Directors, Officer and Co-chair of the RCMA Solar Reflective Coatings Council. Meyer lends his expertise to implement industry promotional programs, and actively plan programs to respond to targeted government and regulatory issues, and technical matters. BD+C

Related Stories

| Nov 21, 2011

Mortenson and enXco partnership to build its 19th wind project

The 8,500 acres project will generate140 megawatts of wind power – enough energy to power approximately 39,000 homes.

| Nov 21, 2011

FDH Engineering acquires Energy Solutions

All ESI employees have been merged into FDH’s staff at its St. Louis office.

| Nov 18, 2011

Centre for Interactive Research on Sustainability opens

Designed to exceed LEED Platinum, the Centre for Interactive Research on Sustainability (CIRS) is one of the most innovative and high performance buildings in North America today, demonstrating leading-edge green building design products, technologies, and systems.

| Nov 17, 2011

SmithGroup changes name to SmithGroupJJR

SmithGroup and JJR join brands to become a single, multi-disciplinary company.

| Nov 17, 2011

Campus-wide energy-efficiency program aims to deliver $3.5 million in energy and operational savings

Merced College and Honeywell will use the school’s energy usage statistics to develop a course curriculum on sustainability, and raise awareness among students of the positive impact conservation practices contribute to the community.

| Nov 17, 2011

Hollister Construction Services renovating bank in Union City, N.J.

Project is part of a series of ground-up construction and renovation assignments.

| Nov 16, 2011

Project completion of BRAC 132, Office of the Chief Army Reserve Building, Ft. Belvoir, Va.

This fast-tracked, design-build project consists of a three-story, 88,470 sf administrative command building housing approximately 430 employees.

| Nov 16, 2011

Architecture Billings Index moves upward

The Architecture Billings Index climbed nearly three points in October. 

| Nov 16, 2011

CRSI recommends return to inch-pound markings

The intention of this resolution is for all new rollings of reinforcing steel products to be marked with inch-pound bar markings no later than January 1st, 2014. 

boombox1
boombox2
native1

More In Category




Resiliency

U.S. is reducing floodplain development in most areas

The perception that the U.S. has not been able to curb development in flood-prone areas is mostly inaccurate, according to new research from climate adaptation experts. A national survey of floodplain development between 2001 and 2019 found that fewer structures were built in floodplains than might be expected if cities were building at random.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021