The Metal Construction Association (MCA) released three updated Environmental Product Declarations (EPDs).
The subjects of the updates are Metal Composite Materials (MCM), Insulated Metal Panels (IMP), and Roll Formed Aluminum and Steel Cladding. The three documents provide key data on the manufacturing and use of these products, and discuss the Life Cycle Assessment (LCA) and environmental impacts associated with the use of metal cladding in construction.
The EPD for Metal Composite Material Panels includes discussion of product manufacture and processing, in-use conditions, life cycle assessment results, and testing results and verifications. Information on performance standards in the areas of fire, system performance, and finishes are detailed.
The EPD for Insulated Metal Panels describes the history, manufacture, and use of IMP panels and systems, and investigates product lifespan from raw material supply, manufacturing, application, maintenance, performance standards, energy use, water use, demolition, and waste recovery or recycling.
The EPD for Roll Formed Aluminum and Steel Cladding for Roofs and Walls details the manufacturing process of roll forming metal materials into a finished product. The forming process, which can be accomplished either in line or in the field, is also discussed, as well as the products’ environmental aspects and impact.
Related Stories
| May 17, 2012
New standard for Structural Insulated Panels under development
ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.
| May 17, 2012
Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’
A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.
| May 17, 2012
California Governor orders new green standards on state buildings
California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.
| May 17, 2012
New Zealand stadium roof collapse blamed on snow, construction defects
Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.
| May 17, 2012
OSHA launches fall prevention campaign
The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.
| May 15, 2012
Suffolk selected for Rosenwald Elementary modernization project
The 314-student station elementary school will undergo extensive modernization.
| May 10, 2012
Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond
Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.
| May 10, 2012
Resilience should be considered a sustainability factor
Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.
