Massachusetts Gov. Charlie Baker recently created the Commission on Clean Heat that will set targets for buildings to reduce emissions from heating fuels.
The board, the first such body in the nation, will further the state’s ambitious plans to reduce carbon emissions. The state has lacked specific pathways to achieve its goals, particularly regarding the heating of buildings.
According to a recent report by the Boston Globe, Massachusetts has been converting just hundreds of homes to electric heat per year when its climate plan called for 100,000 a year. Affordable housing officials will be included on the commission in an effort to make the transition from gas and oil heat to electric more equitable for those of modest means.
Nearly one-third of Massachusetts’ greenhouse gas emissions come from buildings. The commission is expected to establish a cap on emissions from heating fuels similar to what the state has done in the power sector.
Related Stories
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
Codes and Standards | Apr 26, 2018
New standard supports community resilience
ASTM International guidance supports cost-effective ways to withstand and recover from disasters.