Massachusetts, Colorado, and Illinois lead the list of the Top 10 States for LEED, an annual ranking of U.S. states that made significant strides in sustainable building design, construction, and transformation over the past year.
Washington, D.C., is not included in the list of top states due to its status as a federal territory, but its 29.04 sf of LEED space per resident is more than any individual state.
This year’s list has the highest average (2.55 sf) per capita of LEED-certified space among the top 10 states since 2010. Four of the nine states included in the 2015 list increased the square feet of space they certified per resident in 2016 (Massachusetts, Colorado, California and Virginia).
In 2016, LEED for Building Operations and Maintenance was the most popular rating system within the Top 10 States, representing 53% of the total square footage certified. LEED for Building Design and Construction was the second most popular rating system, at 42% of the square footage certified.
Related Stories
Codes and Standards | Mar 7, 2017
Canada’s national building codes will encompass effects of climate change
Forecasted data, not historical data, will be used as the basis for the codes.
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
