Original Mass Timber Maine (OMT Maine) hired the University of Maine to include Maine-sourced Structural Round Timber (SRT) in a research project that will compare the structural building material to glulam and steel products.
The study is designed to understand and compare the costs, capabilities, and carbon impacts of structural materials that could be used to build a hypothetical instructional and research facility. The study’s initial intent was to assess the impacts on budget and carbon footprint of replacing steel and concrete with glulam and cross-laminated timber in the building’s structural system.
The study will now also include the use of Maine-sourced SRT as a mass timber option for comparison. OMT Maine expects results from the cost and feasibility study later this year, with the Life Cycle Assessment Report to be released in early 2022.
SRT can be used for trusses, columns, and beams in building projects of all types, OMT Maine says.
Related Stories
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
| Nov 16, 2012
Green building councils in 62 countries expect 60% of their work to be green by 2015
More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.
| Nov 16, 2012
Voters approve fewer construction ballot measures in 2012 than in 2008
Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.
| Nov 9, 2012
New ANSI/BIFMA standard adds point for lower formaldehyde emissions
The ANSI/BIFMA e3-2012 Furniture Sustainability Standard now includes an additional point for furniture products that meet a new, lower formaldehyde emissions limit.